Klübersynth UH1 14-222 Synthetic lubricating grease 25kg bucket

Synthetic lubricating grease for universal application in the food-processing andpharmaceutical industriesKlübersynth UH1 14-222 was developed for the special requirements of the food-processing and pharmaceutical. Klübersynth UH1 14-222 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical oranimal feed industries. The use of Klübersynth UH1 14-222 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCPContent: 25kg bucketAvailable as 400g cartridge, 1kg can, 25kg bucket, 180kg drumBenefits for your applicationFacilitates product streamlining owing to its wide range of applicationsOffers improved surface protection through good adhesion and its particular consistencyISO 21469 certified – supports the compliance with the hygienic requirements in your production. You will find further information about ISO Standard 21469 on our website www.klueber.comApplicationKlübersynth UH1 14-222 is suitable for use in machines, installations and equipment of the food-processing and pharmaceutical industries, particularly for lubrication points thatmay have incidental and technically unavoidable contact with the food product.This food-grade lubricant is intended for the universal lubrication of rolling and plain bearings, lifting cylinders, joints, guide rods and rails, cams, etc.Technical specificationsArticle number096071NLGI grade, DIN 518182NSF-H1 registration128 827Lower service temperature-25 °C / -13 °FUpper service temperature120 °C / 248 °FColour spacebeigeTexturehomogeneousDensity at 20 °Capprox. 0,94 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value265 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value295 x 0,1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 260 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox.29 mm²/sShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value6 000 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value12 000 mPasLow-temperature torque, IP 186, – 25 °C, start<= 1 000 mNmLow-temperature torque, IP 186, - 25 °C, running<= 100 mNmDrop point, DIN ISO 2176, IP 396>= 220 °CMinimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx.24 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com