Klübersynth UH1 6-100 Synthetic high-performance gear oil 1l can

Klübersynth UH1 6-100  Synthetic high-performance gear oil for the food-processing and pharmaceutical industries | N° 096094Klübersynth UH1 6 is a synthetic high-performance gear oil based on polyglycol satisfying the growing requirements and increasing power density of modern gears.Klübersynth UH1 6 includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.Temperature range: -35°C to +160°C Volume: 1LBenefits for your applicationHigh scuffing protectionGood wear protection for gears and rolling bearingsHigh micropitting resistanceGood shear stability for reliable lubricant film formationOptimised for the lubrication of worm gearsExcellent ageing and oxidation resistanceWide service temperature range due to good viscosity-temperature behaviourLow foaming tendencyApplicationsKlübersynth UH1 6 oil is used for the lubrication of highly loaded spur, bevel and planetary gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperatures.Klübersynth UH1 6 oil was especially developed for the lubrication of worm gears with steel/bronze pairings.It can also be used for the lubrication of lifting, drive and transport chains.Application notesKlübersynth UH1 6 can be applied by means of immersion, immersion circulation or injection.The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible.When using automatic lubricating systems, please note the manufacturer’s instructions regarding the maximum permissible viscosity.The low-viscosity varieties are also used for oil mist lubrication.Article number096094Lower service temperature-35 °C / -31 °FUpper service temperature160 °C / 320 °FDensity, based on DIN 51757) at 15 °C1 040 kg/m³Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 100 mm²/sKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 19.5 mm²/sViscosity index, DIN ISO 2909>= 190ISO viscosity grade, DIN ISO 3448100Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus>= 220 °CPour point, DIN ISO 3016<= -40 °C Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com