Klübersynth UH1 6-220 Synthetic high-performance gear oil 1l tin

Klübersynth UH1 6-220 Synthetic high-performance gear oil | N° 96059Klübersynth UH1 6 is a synthetic high-performance gear oil based on polyglycol satisfying the growing requirements and increasing power density of modern gears. Klübersynth UH1 6 includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear componentsKlübersynth UH1 6 oils are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricants were developed for incidental contact with products and packagingmaterials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klübersynth UH1 6 oils can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCPSize: 1LBenefits for your applicationRegistered as NSF H1 and certified according to ISO 21469High scuffing protectionGood wear protection for gears and rolling bearingsHigh micropitting resistanceGood shear stability for reliable lubricant film formationOptimised for the lubrication of worm gearsExcellent ageing and oxidation resistanceWide service temperature range due to good viscosity-temperature behaviourLow foaming tendencyEnergy savings due to optimised friction behaviourGood elastomer compatibilityApprovals by numerous gear OEMsApplicationKlübersynth UH1 6 oil is used for the lubrication of highly loaded spur, bevel and planetary gears, rolling and plain bearings as well as all types of toothed couplings, especially when exposed to high temperaturesKlübersynth UH1 6 oil was especially developed for the lubrication of worm gears with steel/bronze pairingsIt can also be used for the lubrication of lifting, drive and transport chainsTechnical specifications Article number96059Marking acc. to DIN 51502CLP PG 220Classification acc. to ISO 12925-1CKC 220NSF-H1 registration124 438Lower service temperature-30 °C / -22 °FUpper service temperature160 °C / 320 °FDensity, based on DIN 51757) at 15 °C1 060 kg/m³Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 20 °Capprox. 610 mm²/sKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 220 mm²/sKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 41 mm²/sViscosity index, DIN ISO 2909>= 220ISO viscosity grade, DIN ISO 3448220Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus>= 220 °CPour point, DIN ISO 3016<= -35 °CFoam test, ASTM-D 892, ISO 6247, sequence I/24 °C<= 100/10 mlFoam test, ASTM-D 892, ISO 6247, sequence II/ 93.5 °C<= 100/10 mlFoam test, ASTM D 892, ISO 6247, sequence III/24°C<= 100/10 mlCopper corrosion, DIN EN ISO 2160, 24 h/100°C1 - 100 corrosion degreeAnticorrosive properties on steel, DIN ISO 7120, method A, steel, 24 h/60 °Cno rust corrosion degreeAgeing properties, ASTM D 2893, increase in viscosity<= 6 %FZG scuffing test, DIN ISO 14635-1, A/8.3/90, scuffing load stage>= 12FZG scuffing test, based on DIN ISO 14635-1, A/16.6/90, scuffing load stage>= 12FAG FE8 rolling bearing test, DIN 51819-3, D 7,5/80-80, wear of cage<= 200 mgFAG FE8 rolling bearing test, DIN 51819-3, D 7,5/80-80, wear of rolling element<= 30 mgMinimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.36 months Hazard Information (CLP)Signal word: Danger.Hazard statements (H-phrases)H411: Toxic to aquatic life with long lasting effects.Precautionary statements (P-phrases)Prevention:P273: Avoid release to the environment.Response:P391: Collect spillage.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com