Klübertemp GR M30 High viscosity long-term grease white 10kg hobbock

Klübertemp GR M30 Long-term greases based on perfluorinated polyether | N° 090177Klübertemp GR M greases are white, odourless, long-term greases based on perfluorinated polyether (PFPE) oils and polytetrafluoroethylene (PTFE) thickener.The extremely high viscosity index, i.e. the very flat viscosity curve of the base oils, allows excellent sliding friction properties across a wide service temperature range. Klübertemp GR M greases show a neutral behaviour towards most plastics and elastomers and can therefore be used for a variety of component materials.Content: 10kg bucketBenefits for your applicationLong component lifeOver a wide service temperature rangeIn contact with aggressive mediaWWwhere sensitive plastic materials are usedApplicationKlübertemp GR M greases are preferably used for the lubrication of electromechanical actuators, small gears and seals where they show low breakaway torques, exceptionally low friction values as well as a reduced tendency to stickslip.This leads, for example, to lower frictional heating of elastomers subject to dynamic loads and hence longer component life.Application noteFor optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 followed by Klüberalfa XZ 3-1. Then blow the surfaces with clean, dry air or hot air to remove solvent residues.For initial lubrication, the friction points must be clean and bright, i.e. free from oil, grease, perspiration and contamination. Klübertemp GR M greases may be applied directly or by means of brush, spatula or lubricant dispenser.Technical specifications Chemical composition, type of oil PFPE Lower service temperature -60 °C / -76 °F Upper service temperature 200 °C / 392 °F Colour space white Density at 20 °C approx. 1.94 g/cm³ a Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM  D-445/ASTM D 7042, 40 °C approx. 160 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTMD-445/ASTM D 7042, 100 °C approx. 45 mm²/s Evaporation loss, ASTM D 2595 22h/204°C <= 2 % by weight Texture homogeneous Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com