Loctite 401 Instant adhesive super glue for all surfaces 20g

LOCTITE® 401 is a fast curing instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers.Pack size: 20 g bottle (Loctite no. 1919341)Also available in: , , ApplicationUniversal instant adhesiveVery high strength on close-fitting partsPerfect for all quick repairs and all types of small emergency repairs.Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics as well as most plastics)As a sealant in food processing industries where there is no possibility of food contact in and around food processing areas (regional NSF P1 registered) LOCTITE 401 is also suited to bonding porous materials such as wood, paper, leather and fabric.CharacteristicsGeneral PurposeViscosity: Low ViscosityStrength: High StrengthFixture: Very Fast FixtureTechnical Information Application Method Dispense System, Manual Colour Clear Cure Type Moisture Cure Fixture Time, Steel 5 sec. Gap Fill 0.15 mm Operating Temperature -40 – 120 °C (-40.0 – 250.0 °F ) Physical Form Liquid Shear Strength, Mild Steel (grit blasted) 20.0 N/mm² (2900.0 psi ) Substrates Metal, Plastic, Elastomer, Porous Surface Technology Cyanoacrylate Viscosity 100 mPa·s (cP)Hazard Information (CLP)Signal word: Warning.Hazard Statements (H-Codes) H315: Causes skin irritation. H319: Causes serious eye irritation. H335: May cause respiratory irritation.Supplemental Information Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.Precautionary Statements (P-Codes)Prevention: P261: Avoid breathing vapours. P280: Wear protective gloves/eye protection.Response: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313: If eye irritation persists: Get medical advice/attention.Disposal: P501: Dispose of contents/container in accordance with national regulations. Information on product safety (Manufacturer, Contact)Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, , www.henkel.com