Loctite 4204 High temperature CA instant adhesive clear 20g tube

LOCTITE® 4204 Instant Adhesive is a high viscosity product that cures rapidly when confined between two surfaces. This general-purpose adhesive is a transparent and colourless liquid, suitable for use with metals, rubbers, and plastics while providing improved impact resistance to applications. LOCTITE 4204 is also suitable for use on polyolefins when used in combination with or Primer.Pack size: 20 g tube (Loctite no. 142746)Also available in: 500 g bottleApplicationProduct that offers high temperature and humidity resistance and is ideal for bonding small to medium-sized parts.CharacteristicsFixture time of 10 – 30 secs.Suitable for metals, rubbers and plasticsFlexibleVery high viscositySolvent-freeTechnical specifications Chemical Type  Ethyl cyanoacrylate Appearance (uncured)  Colorless to slightly pale yellowhomogeneous liquid Fixture Time, Steel 120 sec. Gap Fill 0.2 mm Key Characteristics Temperature: High Temperature Operating Temperature -40 – 121 °C (-40 – 250 °F ) Shear Strength, Mild Steel (grit blasted) 16.5 N/mm² (2400.0 psi ) Viscosity 4000 mPa·s (cP) Key Substrates Rubbers, Plastics and MetalsHazard Identification (CLP)  Signal word: Warning.Hazard Statements (H-Sentences)H315: Causes skin irritation.H319: Causes serious eye irritation.H335: May cause respiratory irritation.Precautionary Statements (P-Sentences)Prevention:P210: Keep away from heat, sparks, open flames, hot surfaces – no smoking.P261: Avoid breathing vapors, mist, or spray.P280: Wear protective gloves, eye protection, and face protection.Response:P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to remove. Continue rinsing.P337+P313: If eye irritation persists: Get medical advice/attention.P370+P378: In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.Disposal:P501: Dispose of contents/container in accordance with national regulation.Additional InformationClassification complies with the OSHA Hazard Communication Standard (29 CFR 1910.1200) and is consistent with the provisions of the United Nations Globally Harmonized System of Classification and Labeling of Chemicals (GHS). Information on product safety (Manufacturer, Contact)Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, , www.henkel.com