Loctite 648 Retaining Compound up to 180 °C high strength green 250ml

LOCTITE 648 is designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It exhibits a robust curing performance. Pack size: 250 ml bottle (Loctite no. 1804971)Available as well in  , bag in boxApplicationHolding gears and sprockets onto gearbox shafts and rotors on electric motor shaftsOn active metals (e.g. mild steel) but also on passive substrates such as stainless steel and plated surfacesCharacteristicsFluorescentLow viscosityHigh strengthDesigned for bonding cylindrical fitting partsWorks on active metals (e.g. mild steel) as well as passive substrates such as stainless steel and plated surfacesOffers high temperature performance and oil toleranceTolerates minor surface contaminations from various oils such as cutting, lubrication, anti-corrosion and protection fluidsTemperature resistant up to 180°C (355°F)Fixture Time: 3minColor: greenCertificationWRAS Approval (BS 6920): 0808532DVGW Approval (EN 751-1): NG 5146C00236WRAS Approval (BS 6920): 0808532Technical InformationAgency Approvals / SpecificationsDVGW (EN 751-1): NG 5146C00236, NSF P1 Reg No: 148350, WRAS (BS 6920): 0808532ColorGreenDiametrical Clearance (Maximum)0.1 mmFixture Time3 min.Fixture Time Temperature37 °FFull Cure Temperature77 °FGap Fill0.006 in.Shear Strength Unit, SteelpsiShear Strength, Steel3900Specific Gravity1.13 g/lSpecific Gravity Temperature25 °CSubstratesMetal: SteelTemperature-55 – 180 °CViscosity500 mPa.s (cP) Brookfield Hazard Information (CLP)Signal word: Danger.Hazard StatementsH315: Causes skin irritation.H317: May cause an allergic skin reaction.H318: Causes serious eye damage.H335: May cause respiratory irritation.H412: Harmful to aquatic life with long-lasting effects.Precautionary StatementsFor consumer use only:P101: If medical advice is needed, have product container or label at hand.P102: Keep out of reach of children.P501: Dispose of contents/container in accordance with national regulation.Prevention:P273: Avoid release to the environment.P261: Avoid breathing vapors.P280: Wear protective gloves/eye protection.Response:P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P333+P313: If skin irritation or rash occurs: Get medical advice/attention.P302+P352: IF ON SKIN: Wash with plenty of soap and water.Additional LabelingNo additional information.Storage and DisposalNo special requirements when used properly. Information on product safety (Manufacturer, Contact)Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, , www.henkel.com