Loctite AA 326 Structural adhesive magnet bonder yellow 250ml bottle

LOCTITE® AA 326 is a 2-step, no mix, medium-viscosity structural adhesive for magnet bonding with good adhesion to different types of ferrites. Requires LOCTITE SF 7649 to activate.Pack size: 250ml bottle (Loctite no. 88481)Also available in: ApplicationBonding ferrites to plated materialsIn electric motors, loudspeaker hardware and jewelry where fast fixturing is requiredCharacteristicsGood adhesion to different types of ferritesMedium viscosity (thixotropic)Temperature resistant up to +120°CFixture time is 3 minShear strength is 15 N/mm²Meets BS6920 criteria for contact with potable waterNATO Code: 8040-99-438-5637 Military reference: AFS 1568ATechnical specifications Colour Yellow, Yellow: Amber Chemical Type Polyurethane methacrylate FEA (Finite Element Analysis) Viscoelastic Fixture Time 3 min Key Characteristics Mix: No Mix Required Shear Strength 15 N/mm² Viscosity, Brookfield – RVT, @ 25.0 °C Spindle 6, speed 20 rpm   14000 – 22000 mPa·s (cP) Viscosity, EN 12092 – MV, @ 25.0 °C Shear Rate 36 s⁻¹ 10000 – 20000 mPa·s (cP)Loctite AA326, Loctite AA-326Hazards (CLP)Signal word: Warning.Hazard statements (H-statements)H315: Causes skin irritation.H317: May cause an allergic skin reaction.H319: Causes serious eye irritation.H335: May cause respiratory irritation.H412: Harmful to aquatic life with long lasting effects.Precautionary statements (P-statements)Prevention:P280: Wear protective gloves.P261: Avoid breathing vapors.P273: Avoid release to the environment.Response:P302+P352: IF ON SKIN: Wash with plenty of soap and water.P333+P313: If skin irritation or rash occurs: Get medical advice/attention.P337+P313: If eye irritation persists: Get medical advice/attention.For consumer use only:P101: If medical advice is needed, have product container or label at hand.P102: Keep out of reach of children.P501: Dispose of contents/container in accordance with national regulations.Additional labeling (EUH-statements)No additional warnings.Storage and disposalNot fulfilling PBT or vPvB criteria.This mixture does not contain substances ≥ the concentration limit assessed as PBT, vPvB, or ED. Information on product safety (Manufacturer, Contact)Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, , www.henkel.com