Loctite EA 3471 Fixmaster Steel Putty Repair Metal Set S1 – 500g

LOCTITE® EA 3471 (known as Fixmaster® Steel Putty or Hysol® 3471) is a steel reinforced, two-part epoxy repair putty that cures to a metal-like finish and can be machined, drilled, tapped or filed.Pack size: 2 x 250 g cans (Loctite no. 229176)ApplicationTypical applications include repairing non-structural defects in castings, making jigs and fixtures, sealing vessels, tanks and valves, resurfacing worn air seals and filling cavitated areas. This product is typically used in applications with an operating range of -30 °C to 105 °C.CharacteristicsCures to a metal-like finishSuperior adhesion on metal surfacesBonds well to all metal substratesWill not sag or shrinkTechnical specifications Fixture Time 180 min Chemical Type Epoxy Appearance (Resin) Grey Appearance (Hardener) W White Appearance (Mixed) Grey putty Mix Ratio, by weight Resin : Hardener 6.25 : 1 Mix Ratio, (by volume) Resin : Hardener 2.5 : 1 Shear strength 20.0 N/mm² Cure Room temperature cure after mixing Application Temperature 15 to 30°C (59 to 86°F)Loctite EA3471, Loctite EA-3471Hazard Pictogram:Signal word:Caution (Part A)Danger (Part B)Hazard Statements:H315 Causes skin irritation (Part A)H317 May cause an allergic skin reaction (Part A & Part B)H319 Causes serious eye irritation (Part A)H314 Causes severe skin burns and eye damage (Part B)H411 Toxic to aquatic life with long-lasting effects (Part A)H412 Harmful to aquatic life with long-lasting effects (Part B)Precautionary Statements:Prevention:P273 Avoid release to the environment (Part A & Part B)P280 Wear protective gloves (Part A) / Wear protective gloves/protective clothing/eye protection/face protection (Part B)Response:P302+P352 IF ON SKIN: Wash with plenty of water and soap (Part A)P303+P361+P353 IF ON SKIN (or hair): Remove contaminated clothing immediately. Wash skin with water [or shower] (Part B)P333+P313 If skin irritation or rash occurs: Get medical advice/attention (Part A)P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing (Part B)P337+P313 If eye irritation persists: Get medical advice/attention (Part A)P310 Immediately call a poison center/doctor (Part B)×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, , www.henkel.com