Loctite EA 9483 Two Part Epoxy Adhesive clear 50ml catridge

Loctite® EA 9483 Epoxy adhesive designed for applications demanding optical clarityLOCTITE® EA 9483 is a 2-part, ultra-clear, flowing, general purpose epoxy adhesive suitable for bonding and potting where optical clarity and high strength are required. For instance, the product is ideal for bonding decorative panels and displays. It offers low moisture absorption, cures at room temperature and delivers a tensile strength of 47 N/mm².Volume: 50mlIDH-No. 2056392ApplicationDesigned for applications demanding optical clarity and high strength, such as decorative panels and displaysCharacteristicsHigh strengthFlowableUltra-clearLow moisture absorptionTechnical Information Fixture Time 210.0 min. Mix Ratio, by Volume   2 : 1 Mix Ratio, by Weight 100 : 46 Peel Strength, Mild Steel (grit blasted)   1.5 N/mm Technology  Epoxy Components Two part – Resin & Hardener Viscosity Low Application Bonding Cure Room temperature cure after mixing  Hazard Information (CLP)Signal word:Warning (Part A) / Danger (Part B)Hazard statements:H315 Causes skin irritation.H317 May cause allergic skin reactions.H319 Causes serious eye irritation.H314 Causes severe skin burns and eye damage (Part B).H411 Toxic to aquatic life with long-lasting effects.Precautionary statements:Prevention:P273 Avoid release to the environment.P280 Wear protective gloves (Part A) / Wear protective gloves/clothing/eye protection/face protection (Part B).Response:P302+P352 IF ON SKIN: Wash with plenty of water and soap (Part A).P303+P361+P353 IF ON SKIN (or hair): Remove contaminated clothing immediately. Wash skin with water [or shower] (Part B).P333+P313 If skin irritation or rash occurs: Get medical advice/attention.P337+P313 If eye irritation persists: Get medical advice/attention (Part A).P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing (Part B).P310 Immediately call a Poison Center/doctor (Part B). ×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, , www.henkel.com