Loctite HY 4090 2-part hybrid universal structural bonder 50g

Loctite® HY 4090 2-part hybrid universal structural bonderLOCTITE® HY 4090 is a high viscosity, off-white to light yellow gel. It opens completely new application areas in structural bonding – for the very first time combining instant adhesive properties with those for epoxies to give more striking benefits. Fixture time of 90 – 180 seconds and suitable for gaps up to 5 mm. Resistant to vibration, shock loads and impacts with the ability to bond dissimilar substrates. Best application results are achieved with LOCTITE® 50 ml Adhesive Mixing Nozzle (item 1826921), LOCTITE® 400 ml Adhesive Mixing Nozzle (item 1573135), LOCTITE® 96001 (item 267452) or LOCTITE® 983439 (item 218311).ApplicationIt is designed to bond a variety of substrates including metals, most plastics and rubbers.CharacteristicsVibration, shock loads and impact resistanceTemperature resistance up to 150 °CGap filling up to 5mmHigh moisture resistanceUV resistant allowing outdoor applicationsTechnical specifications Chemical Type (Part A) Cyanoacrylate Chemical Type (Part B)  Epoxy Appearance (Comp. A) Transparent colorless to straw colored liquid Appearance (Comp. B) Off-white to light yellow gel Components  Two components – requires mixing Viscosity  High Fixture Time <180.0 sec. Gap Fill 2.0 mm Mix Ratio, by Weight 1 : 1 Shear Strength, Steel (grit blasted) 17.0 N/mm² (2420.0 psi ) Cure Room temperature cure after mixingHazard Identification (CLP)Signal Word: WarningHazard Statements:H315: Causes skin irritation.H319: Causes serious eye irritation.H335: May cause respiratory irritation.Supplemental Information:Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.Precautionary Statements:Prevention:P280: Wear protective gloves/eye protection.P261: Avoid breathing vapors.Response:P337+P313: If eye irritation persists, get medical advice/attention.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.Disposal:P501: Dispose of contents/container in accordance with national regulation.Other Hazards:None if used properly.This mixture does not contain any substances in concentrations ≥ the concentration limit for depiction in Section 3 that are assessed to be a Persistent, Bioaccumulative, and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB) or Endocrine Disruptor (ED). Information on product safety (Manufacturer, Contact)Henkel AG & Co. KGaA, Henkelstr. 67, 40589 Düsseldorf, GERMANY, +49 211 7970, , www.henkel.com