Metal etching pen for aluminium with 2 cartridges ‘nigrit AL’ 861

E.O. metal etching pen with two cartridges ‘nigrit AL861’For the marking of aluminiumEqually suitable for stainless steel, tool steel, hardenend surfaces and thin walled componentsUse detailsThe marking surfaces should be cleaned (freely of fat and impurities, unpolished, etc.), so that the necessary contact of the corroding draw with the metal can take place directly and immediatelyAssembly instructionsBoth mines have to be inserted as follows into the penThe refill mine must be inserted with the blue protective cap in the penThe front mine will be placed after removed of the blue capNote: The points of the mines are provided with 2 slots and may not be further cut. METAL ETCHING PEN SETTING UPMetal etching pen / cartridges disassembledA – Closing capB – Rubber gripC – Two-sided screw thread centre pieceD – Pen’s end screwing pieceExemple cartridgesCartridge 1a : Cartridge Nigrit ‘VA’ green without capCartridge 1b : Cartridge ‘VA’ green with capCartridge 2a : Cartridge K-extra blue without cap.Cartridge 2b : Cartridge K-extra blue with capInstructions for usePart of the pen for the spare cartridge (cartridge must be always closed), that you insert backwards from the back of the part C.Cartridge without cap (ready for use) to insert in the part B (Part with the rubber grip), then close it by screwing in the part C. At the end of use, replace the cap, Part A.Hazard Warnings (CLP)Signal word: DangerHazard Statements (H-phrases)H302+H312: Harmful if swallowed or in contact with skin.H314: Causes severe skin burns and eye damage.H317: May cause an allergic skin reaction.H411: Toxic to aquatic life with long-lasting effects.Safety Statements (P-phrases)Prevention:P102: Keep out of reach of children.P202: Read and understand all safety precautions before use.P270: Do not eat, drink, or smoke when using this product.P260: Do not breathe dust/fume/gas/mist/vapors/spray.P272: Contaminated work clothing should not be allowed out of the workplace.P273: Avoid release to the environment.P280: Wear protective gloves/protective clothing/eye protection/face protection.Response:P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.P303+P361+P353: IF ON SKIN (or hair): Remove immediately all contaminated clothing. Rinse skin with water/shower.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.P310: Immediately call a POISON CENTER/doctor.P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.P391: Collect spillage.Storage:P405: Store locked up.Disposal:P501: Dispose of contents/container in accordance with local regulations.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)Emil Otto Flux- und Oberflächentechnik GmbH, Eltviller Landstraße 22, 65346 Eltville am Rhein, GERMANY, +49 6123 70 46-0, , www.emilotto.de