Metal etching pen with 2 nigrit VA green 865 cartridges

E.O. metal etching pen with two cartridges ‘nigrit VA 865’ greenFor the marking of steel, copper, nickel, tinplate, lead and yellow metalEqually suitable for stainless steel, tool steel, hardenend surfaces and thin walled componentsUse detailsThe marking surfaces should be cleaned (freely of fat and impurities, unpolished, etc.), so that the necessary contact of the corroding draw with the metal can take place directly and immediatelyAssembly instructionsBoth mines have to be inserted as follows into the penThe refill mine must be inserted with the blue protective cap in the penThe front mine will be placed after removed of the blue capNote: The points of the mines are provided with 2 slots and may not be further cut.METAL ETCHING PEN SETTING UPMetal etching pen / cartridges disassembledA – Closing capB – Rubber gripC – Two-sided screw thread centre pieceD – Pen’s end screwing pieceExemple cartridgesCartridge 1a : Cartridge Nigrit ‘VA’ green without capCartridge 1b : Cartridge ‘VA’ green with capCartridge 2a : Cartridge K-extra blue without cap.Cartridge 2b : Cartridge K-extra blue with capInstructions for usePart of the pen for the spare cartridge (cartridge must be always closed), that you insert backwards from the back of the part C.Cartridge without cap (ready for use) to insert in the part B (Part with the rubber grip), then close it by screwing in the part C. At the end of use, replace the cap, Part A.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)Emil Otto Flux- und Oberflächentechnik GmbH, Eltviller Landstraße 22, 65346 Eltville am Rhein, GERMANY, +49 6123 70 46-0, , www.emilotto.de