Mipa Quick Cleaning solvent for industrial RAL paint 750g can

Usage:Mipa paint stripper Quick is a ready-to-use, gel-like CHC, NMP and aromatic-free paint stripper for removing old paint and paint layers from all common substrates such as Stone, wood or metal.Characteristics:Free of CHC, NMP and aromaticsCan also be used on vertical surfaces due to its gel-like propertiesCharacteristics:Viscosity: thixotropicDensity: approx. 0.947 g / cm³Storage: Can be stored in closed containers for at least 2 years.Close the container well after use. Store and transport cool, dry and frost-free.Application:Apply the product evenly with a brush, spatula, brush or roller undiluted.In the case of multi-layer paints, it is recommended to apply a second rich layer.Shake well before use. Processing not at temperatures below +5 ° C and / or relative humidity> 80%.Do not use on PVC and plastic!Depending on the thickness and number of layers of old paint, let it work for at least 20 minutes. If necessary, repeat the process with a longer exposure time.The optimal effectiveness is recognizable by strong ripples in the paint to be removed.Carry out trial order. If the sun is shining and / or the surface is very warm, leave it on for a short time, remove and reapply.Remove loosened coats with suitable tools (e.g. spatula, brass wire brush, stainless steel wool etc.).Clean metals with silicone remover; Only wash wood with warm water.Wood: Allow to dry for at least 24 hours.Note wood moisture before repainting.Substrate: Remove or cover metal or plastic fittings, expansion joints and seals. Surface contamination such as Brush off dirt beforehand.Coverage: 3 m² / L depending on the surfaceApplication:Apply the product evenly with a brush, spatula, brush or roller undiluted.In the case of multi-layer paints, it is recommended to apply a second rich layer.Shake well before use. Processing not at temperatures below +5 ° C and / or relative humidity> 80%.Do not use on PVC and plastic!Depending on the thickness and number of layers of old paint, let it work for at least 20 minutes. If necessary, repeat the process with a longer exposure time.The optimal effectiveness can be recognized by strong curling of the paint to be removed.Carry out trial order. If the sun is shining and / or the surface is very warm, leave it on for a short time, remove and reapply.Remove loosened coats with suitable tools (e.g. spatula, brass wire brush, stainless steel wool etc.).Clean metals with silicone remover; Only wash wood with warm water. Wood: Allow to dry for at least 24 hours.Note wood moisture before repainting.Substrate: Remove or cover metal or plastic fittings, expansion joints and seals. Surface contamination such as Brush off dirt beforehand.Coverage: 3 m² / L depending on the surface Information on product safety (Manufacturer, Contact)MIPA SE, Am Oberen Moos 1, 84051 Essenbach, GERMANY, +49 8703 9220, , www.mipa-paints.com