MOTOREX 304588 CS-Cleaner system cleaner for cooling systems 1L

CS-CLEANER is a neutral system cleaner for coolant circuits and the spindle cooling systems of machine tools. Thanks to innovative additives without any biocides, CS-CLEANER does not fall into the biocide product category and can be used worldwide without any restrictions.CS-CLEANER is excellently suited to removing residual dirt and other contaminants such as fungus residues in coolant circuits.CharacteristicsGreat cleaning effectDissolves grease, oil and typical residual sludgeCompatible with plastics, paints and metalsFree of VOCsPleasant citrus odorApplication48 hours before replacing the coolant, add 3% (based on system volume) of CS-CLEANER.For heavily contaminated cooling systems, we recommend leaving the CS-CLEANER in the system for as much as 72 hours or adding a biocide.After adding the system cleaner, machining may continue as usual without interruption.To consider before refillingTypical residual sludge like solid fungus remains must be removed mechanically.Drain system completely and clean thoroughly.Note: Applicable for water-miscible coolants only, such as Motorex Cool X or Core Ready PlusTechnical specificationsColor (DIN ISO 2049): light yellowDensity at 20 °C (ASTM D 4052): 1.066 g/ml pH value: 7.9Flash point: 65 °CWater hazard class: WGK 1Disposal code: VeVA/EWC 07 06 01Content: 1L bottleAlso available as: , 25 L canisterHazard Information (CLP)Signal word: Danger.Hazard statements (H-phrases)H315: Causes skin irritation.H318: Causes serious eye damage.H317: May cause an allergic skin reaction.Precautionary statements (P-phrases)Prevention:P261: Avoid breathing dust/fume/gas/mist/vapors/spray.P264: Wash thoroughly after handling.P280: Wear protective gloves / eye protection / face protection.Response:P302+P352: IF ON SKIN: Wash with plenty of water.P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310: Immediately call a POISON CENTER/doctor.P321: Specific treatment (see label).P362+P364: Take off contaminated clothing and wash it before reuse.P333+P313: If skin irritation or rash occurs: Get medical advice/attention.Disposal:P501: Dispose of contents/container in accordance with local/regional/national/international regulations.Additional InformationContains biocidal products: Propan-2-ol, 1,2-Benzisothiazol-3(2H)-one. Information on product safety (Manufacturer, Contact)MOTOREX AG, Bern-Zürich-Strasse 31, 4901 Langenthal, SWITZERLAND, +41 62 919 75 75, , www.motorex.com