MOTOREX COOL CONCENTRATE Fully synthetic, water-miscible coolant 5L

Fully synthetic, water-miscible coolant concentrate for spindle cooling circuits. Concentration of the mixture: 11%Motorex COOL CONCENTRATE ingredients passivate the various materials used in a closed cooling circuit and provide protection against corrosion*. Mixed COOL-CONCENTRATE is a very efficient coolant with a specific heat of 4.1 J/g-K, which is virtually the same value as for water (4.187 J/g-K).Pack size: 5L canisterAlso available as: CharacteristicsReady to useVery efficientHeat dissipationPrevents electrochemical corrosionEffectively protects aluminum, nonferrous and ferrous metals against corrosionGalvanized parts are not attackedLow maintenanceCompatibility with the plastics and sealing materials commonly used in mechanical engineering tested and confirmedApplication When preparing the mixture with COOL CONCENTRATE, use only drinking water which does not exceed the following limits:Water hardness max. 20°dH / 35°f/ 350 ppmChloride max. 100 ppmSulphate max. 100 ppmPrepare a mixture of 11% with COOL CONCENTRATEOnly use clean containers for preparing the mixturePour the mixture into the prepared cooling system immediatelyIf these water values are outside the acceptable limits, the mixture must be prepared with demineralised water or MOTOREX COOL-X ready-mix must be used! Under optimum operating conditions and in compliance with the instructions for use, the COOL CONCENTRATE mixture can remain in use for up to 1 yearsAn operating temperature of 20 – 25 °C protects elastomers very effectively in the long termNOTES: If rotary or swivel tables (i.e. slowly rotating or oscillating components) are cooled from the same coolant tank as the main spindle, we recommend the use of COOL-X AW which provides a higher lubrication capacity or the addition of the lubrication additive Lube 400 to the existing COOL-CONCENTRATE mixture.MaintenanceThe diluted COOL-CONCENTRATE mixture must be checked periodically according to the specifications of the spindle or machine tool manufacturerBefore each coolant change, we recommend a system cleaning of the cooling circuit by adding 3 % CS-CLEANER to the coolant to be replacedContinue working for 48 hours, then empty and clean the coolant tank and refill with diluted COOL-CONCENTRATEGenerally observe the maintenance instructions of the spindle manufacturerNote: You can find the  !Technical specifications​Color (DIN ISO 2049) : fluorescent greenDensity at 20°C (ASTM D 4052) : 1.095 g/mlViscosity at 40°C (DIN 51562-1) : 55 mm²/sPH value range (DIN 51785): 8.0 – 8.7Freezing point (ASTM D 5950): -25 °CApplication range: 4 – 80 °CRefractometer reading value:  *1.9 % Brix-1Manufacturer Number: 303892 / 303893Hazard Information (CLP)Signal word: Danger.Hazard statements (H-phrases)H302 Harmful if swallowed.H315 Causes skin irritation.H318 Causes serious eye damage.H360D May damage the unborn child.H373 May cause damage to organs through prolonged or repeated exposure.Precautionary statements (P-phrases)Prevention:P260 Do not breathe dust/fume/gas/mist/vapours/spray.P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.Response:P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER/doctor.P321 Specific treatment (see label).P330 Rinse mouth.P362+P364 Take off contaminated clothing and wash it before reuse.Storage:P405 Store locked up.Disposal:P501 Dispose of contents/container in accordance with local/regional/national/international regulations.Additional InformationFor professional users only.Contains biocidal products: 2-Phenoxyethanol.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)MOTOREX AG, Bern-Zürich-Strasse 31, 4901 Langenthal, SWITZERLAND, +41 62 919 75 75, , www.motorex.com