MOTOREX COOL-X Coolant for spindle cooling systems ready to use 200L

MOTOREX COOL-X is a ready-to-use coolant with corrosion protection for high-performance spindles.The ingredients passivate the various materials and protect them against corrosion in the long term. COOL-X is a very efficient coolant with a specific heat of 4.1 J / g-K, which is almost as good as that of water (4.187 J / g-K).CharacteristicsReady to useVery efficientHeat dissipationPrevents electrochemical corrosionEffectively protects aluminum, nonferrous and ferrous metals against corrosionGalvanized parts are not attackedLow maintenanceCompatibility with the plastics and sealing materials commonly used in mechanical engineering tested and confirmedVolume: 200L barrelAlso available as: canister, barrelApplicationCOOL-X is ready to use, 11% concentration. do not add any water.An average operating temperature of 20 – 25 ° C is very effective in protecting elastomers in the long term.If the conditions of use are optimal and the instructions for use are complied with, the coolant can remain in use for up to 2 years storage Store the MOTOREX COOL-X closed in the original container at 5 – 35 ° C.In general, MOTOREX COOL-X should not be exposed to temperatures below 0 ° C.It freezes at a temperature of – 9 ° C.If the MOTOREX COOL-X is exposed to frost during transport and freezes, it can reach temperatures of min. + 5 ° C can be thawed again.Make sure that the liquid is completely thawed.Shake the container well after thawing.The max. storage time in the closed original container is 1 year.MaintenanceCOOL-X must be checked periodically in accordance with the specifications of the spindle or machine manufacturer (please note the maintenance instructions on the back).If a third-party product is to be replaced by COOL-X, the cooling system must be replaced with 3% CS-CLEANER for 48 operating hours be treated.Please note the maintenance instructions of the spindle manufacturer.Note: You can find the  !Technical specifications​Color (DIN ISO 2049): fluorescent greenDensity at 20 °C  (ASTM D 4052): 1.010 g/mlPH value range (DIN 51785): 8.0 – 8.7Solidification point (ASTM D 5950): -9 °CApplication range: 4 – 80 °CReading value of refractometer:  *1.9 % Brix-1Water hazard class: WGK1Disposal code: VeVA / EWC 120109Hazard Statements (CLP)Signal word: Danger.Hazard Statements (H-phrases)H319: Causes serious eye irritation.H360D: May damage the unborn child.Precautionary Statements (P-phrases)Prevention:P201: Obtain special instructions before use.P202: Do not handle until all safety precautions have been read and understood.P264: Wash thoroughly after handling.P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.Response:P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.P308+P313: IF exposed or concerned: Get medical advice/attention.P337+P313: If eye irritation persists: Get medical advice/attention.Storage:P405: Store locked up.Disposal:P501: Dispose of contents/container in accordance with local/regional/national/international regulations.Additional InformationFor professional users only.Contains biocidal products: 2-Phenoxyethanol. Information on product safety (Manufacturer, Contact)MOTOREX AG, Bern-Zürich-Strasse 31, 4901 Langenthal, SWITZERLAND, +41 62 919 75 75, , www.motorex.com