Perma CLASSIC 120 Single-point lubricator with Klüberlectric BQ 72-72

Perma CLASSIC 120 Lubricant dispenser with Klüberlectric BQ 72-72 N | N° 114108Klüberlectric BQ 72-72 Electroconductive low-noise rolling bearing grease for long-term lubricationInnovative lubricant containing ionic liquids to provide electroconductivityExcellent behaviour at high and low temperaturesEspecially for lifetime lubrication of capped or sealed deep groove ball bearingsVery good low-noise characteristicsTechnical specificationsChemical composition, thickener: polyureaChemical composition, type of oil: ester oilLower service temperature: -45 °C / -49 °FUpper service temperature: 180 °C / 356 °FColour space: beigeTexture: homogeneousTexture: short-fibredDensity at 20 °C: approx. 0.96 g/cm³Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C: approx. 72 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C: approx. 9.5 mm²/sApplicationsKlüberlectric BQ 72-72 is primarily used for the long-term lubrication of capped or sealed ball bearings.Many of them are components of speed-controlled electric motors, generators or fans, or they operate in automobile applications where long service life has to be attained at above-average permanent temperatures and noise must be kept under control.Perma CLASSIC 120 Automatic lubrication systemPerma CLASSIC is a single-point lubrication system for roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains, etc.Operates at ambient temperatures between 0 up to +40 °C.Typical applications can be found in mining, steel, automotive and mechanical engineering.The reliable operating principle is based on an electrochemical reaction.The lubrication period is determined by color coded activator screws.Depending on your application’s requirement, you may choose to discharge 120 cm³ in a period of 1, 3, 6 or 12 months.The activator screw generates pressure (max. 4 bar) which moves the piston forward and continuously injects small lubricant amounts into the lubrication pointPerma CLASSIC is fully dust and water proof and can withstand impacts and accidental knocks.Note: For each Classic 120 dispenser you need an activator screw, which you can order under the links below: ( ;  ;  ; ) Information on product safety (Manufacturer, Contact)perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0,