Perma CLASSIC 120 Single-point lubricator with Microlube GB 0 grease

Perma CLASSIC 120 cm³ automatic single-point lubricator with MICROLUBE GB 0 grease | N° 100109MICROLUBE GB 0 Universal high-performance lubricantUniversal high-performance lubricantHigh pressure absorption capacityGood wear protectionGood anticorrosion behaviourPumpable through centralized systemsTechnical specificationsTexture: homogeneousColour space: redDensity at 20 °C: approx. 0.90 g/cm³Base oil viscosity at 40 °C, calculated value: approx.:590 mm²/sBase oil viscosity at 100 °C, calculated value: approx. 31.5 mm²/sShear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer: approx. 3 000 mPasDrop point, DIN ISO 2176, IP 396: > 180 °CApplicationsMICROLUBE GB 0 was especially developed for friction points subject to high loads and mixed friction conditions.It is a universal grease suitable for the lubrication of eccentric presses (e.g. make Müller-Weingarten), heavy-duty spur and bevel gears with steel/steel components (e.g. gear motors that are not oiltight), slideways, guides and sump lubricated rolling bearings. Hazard Information (CLP) Signal word: WarningHazard statements (H-codes) H319: Causes serious eye irritation.Precautionary statements (P-codes)Prevention: P264: Wash skin thoroughly after handling.P280: Wear eye protection/face protection.Response: P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337 + P313: If eye irritation persists: Get medical advice/attention.Additional Labelling (EUH-codes) EUH208: Contains dibutyl[[bis[(2-ethylhexyl)oxy]phosphinothioyl]thio]succinate. May produce an allergic reaction.Perma CLASSIC 120 Automatic lubrication systemPerma CLASSIC is a single-point lubrication system for roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains, etc.Operates at ambient temperatures between 0 up to +40 °C.Typical applications can be found in mining, steel, automotive and mechanical engineering.The reliable operating principle is based on an electrochemical reaction.The lubrication period is determined by color coded activator screws.Depending on your application’s requirement, you may choose to discharge 120 cm³ in a period of 1, 3, 6 or 12 months.The activator screw generates pressure (max. 4 bar) which moves the piston forward and continuously injects small lubricant amounts into the lubrication pointPerma CLASSIC is fully dust and water proof and can withstand impacts and accidental knocks.Note: For each Classic 120 dispenser you need an activator screw, which you can order under the links below: ( ;  ;  ; ) Information on product safety (Manufacturer, Contact)perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0,