Perma CLASSIC 120 Single-point lubricator with ML NY O 9400/220

Perma CLASSIC 120 Lubricant dispenser with ML NY O 9400/220 | N° 113143ML lubrication NY O 9400/220 Multifunctional slideway oil ISO VG 220Preparation consisting of low-aromatic, paraffinic mineral oil solvent raffinates, polar ingredients for friction reduction, corrosion inhibitors, wear-reducing and load-carrying additives, as well as antioxidants and adhesion improvers.Technical specificationsAppearance: homogeneous, light brown liquid visuallyDensity at 15 °C: 888 kg/m³ DIN EN ISO 12185Kinematic viscosity at 40 °C: 220 mm²/s ISO 3104Cloud point: – 9 °C ISO 3016Flash point (COC): 235 °C ISO 2592Corrosion protection (dist. water): 0 – B ISO 7120 BCopper corrosion: 1 ISO 2160ApplicationsThe multifunctional slideway oil exhibits excellent friction-sliding behavior and meets the requirements of combined hydraulic, gearbox, and slideway lubrication.Through the use of intelligently combined adhesion additives, the oil forms stable, well-lubricating oil films at the sliding points.Further excellent properties include good demulsification ability from water-mixed cutting fluids and corrosion protection for ferrous and non-ferrous metals.Perma CLASSIC 120 Automatic lubrication systemPerma CLASSIC is a single-point lubrication system for roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains, etc.Operates at ambient temperatures between 0 up to +40 °C.Typical applications can be found in mining, steel, automotive and mechanical engineering.The reliable operating principle is based on an electrochemical reaction.The lubrication period is determined by color coded activator screws.Depending on your application’s requirement, you may choose to discharge 120 cm³ in a period of 1, 3, 6 or 12 months.The activator screw generates pressure (max. 4 bar) which moves the piston forward and continuously injects small lubricant amounts into the lubrication pointPerma CLASSIC is fully dust and water proof and can withstand impacts and accidental knocks.Note: For each Classic 120 dispenser you need an activator screw, which you can order under the links below: ( ;  ;  ; ) Information on product safety (Manufacturer, Contact)perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0,