Perma CLASSIC 120 Single-point lubricator with Mobil XHP 222

Perma CLASSIC ​​Mobil XHP 222 120 cm³ automatic single-point lubricator with high temperature bearing grease | N° 100305Mobilgrease XHP 222Mobil Mobilgrease XHP 222 is a KP 2 N -20 lithium complex soap grease for excellent lubricity at low temperatures.ApplicationMobilgrease XHP 222 is recommended by ExxonMobil for industrial and marine applications, chassis components and farm equipment. Its sticky formulation stays in applications longer.Wide range of applications including the industrial, automotive, construction and marine sectorsSpecifications & ApprovalsDIN 51825:2004-06 – KP 2 N -20Fives Cincinnati P-64 NLGI HPM+WR FeaturesExcellent lubricity at low temperatures (down to -20°C) Superb resistance to water washout and spray-offHighly adhesive and cohesive structureExcellent rust and corrosion resistanceVery good resistance to thermal, oxidative and structural degradation at high temperatureVery good anti-wear and EP performanceBroad multi-purpose applicationContainer size: 390g canisterAlso available in: 18kg bucket, 50kg and 180kg drumAdvantages and Potential BenefitsHelps assure proper lubrication and protection even in the most severe water exposure conditionsExcellent grease tenacity, helps reduce leakage and extend re-lubrication intervals for reduced maintenance requirementsProtection of lubricated parts even in hostile aqueous environmentsHelps extend grease life and enhance bearing protection in high temperature applications helping to reduce maintenance and replacement costsReliable protection of lubricated equipment, even under conditions of high sliding with potential for extended equipment life and reduced unanticipated downtimeProvides potential for inventory rationalization and reduced inventory costsTechnical specifications Manufacturer number 153552 Viscosity class NLGI 2 Thickener Type Lithium Complex Color, Visual Dark blue Corrosion Preventive Properties, Rating, ASTM D1743 Pass Dropping Point, °C, ASTM D2265 290 Oxidation Stability, Pressure Drop, 100 h, kPa, ASTM D942 35 Penetration, 60X, 0.1 mm, ASTM D217 280 Viscosity @ 100 C, Base Oil, mm2/s, ASTM D445 220 Viscosity Index, ASTM D2270 94 Water Sprayoff, Loss, %, ASTM D4049 10 Water Washout, Loss @ 79 C, wt%, ASTM D1264 5Perma CLASSIC 120 Automatic lubrication systemPerma CLASSIC is a single-point lubrication system for roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains, etc.Operates at ambient temperatures between 0 up to +40 °C.Typical applications can be found in mining, steel, automotive and mechanical engineering.The reliable operating principle is based on an electrochemical reaction.The lubrication period is determined by color coded activator screws.Depending on your application’s requirement, you may choose to discharge 120 cm³ in a period of 1, 3, 6 or 12 months.The activator screw generates pressure (max. 4 bar) which moves the piston forward and continuously injects small lubricant amounts into the lubrication pointPerma CLASSIC is fully dust and water proof and can withstand impacts and accidental knocks.Note: For each Classic 120 dispenser you need an activator screw, which you can order under the links below: ( ;  ;  ; ) Information on product safety (Manufacturer, Contact)perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0,