Perma Flex M125 Lubricant dispenser with Petamo GHY 133 N

Perma Flex M125 Lubricant dispenser with Klüber Petamo GHY 133 N | N° 107192Perma Flex M125 Lubricant dispenserThe automatic lubrication system perma FLEX is available in two convenient sizes (60 cm³ / 125 cm³).It can be used for inside or outside applications at temperatures ranging from -20 °C to +60 °C.Discharge period setting is flexible and can be adjusted from 1 – 12 months using the dial on top of the lubricator.Perma FLEX comes fully assembled and ready-to-use. Simply turn the dial to the desired discharge period and the system is activated.The electronically controlled chemical reaction will build up the pressure that is necessary to continually supply the lubrication point with fresh lubricant.Klüber Petamo GHY 133 N Long-term and high-temperature grease for rolling bearingsResistance to high temperaturesHigh resistance to oxidationEfficient wear protection even at high temperaturesGood corrosion protectionGood water resistanceReduced maintenance due to lifetime lubricationWide service temperature range allows a variety of applicationsReliable operation and long service life due to excellent protection against wear and corrosion, especially in water pump bearings and clutch release bearings Technical specificationsChemical composition, type of oil: synthetic hydrocarbon oilChemical composition, type of oil: mineral oilChemical composition, thickener: polyureaLower service temperature: -40 °C / -40 °FUpper service temperature: 160 °C / 320 °FColour space: brownDensity at 20 °C: approx. 0.90 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value: 265 x 0.1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value: 295 x 0.1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C: approx. 165 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C: approx. 18 mm²/sDrop point, DIN ISO 2176, IP 396: >= 250 °CSpeed factor (n x dm): approx. 500 000 mm/minApplicationsRolling bearings inElectric motorsFan heatersDrying installationsTextile machinesPaper machinesAutomotive components, e.g.Belt tensioning rollers (rotating outer ring)CouplingsWater pumpsFansWheel bearingsHazard statements (CLP)Signal word: WarningHazard statements (H-phrases)H410: Very toxic to aquatic life with long lasting effects.Safety precautions (P-phrases)Prevention:P273: Avoid release to the environment.Response:P391: Collect spillage.Additional labeling (EUH-phrases)EUH208: Contains condensation products of fatty acids, tall oil with 2-amino-2-ethylpropanediol. May cause allergic reactions.Storage and disposalThis substance/mixture contains components classified as persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB).This substance/mixture contains components identified under Article 57(f) of the REACH regulation, Commission Regulation (EU) 2018/605, or Commission Delegated Regulation (EU) 2017/2100 as endocrine-disrupting for the environment.Other relevant informationThis substance/mixture contains no components with endocrine-disrupting properties according to REACH Article 57(f) or Commission Delegated Regulation (EU) 2017/2100 or 2018/605 in concentrations of 0.1% or more.Klüber Petamo GHY133N, Petamo GHY 133N, GHY-133-N, GHY-133 N Information on product safety (Manufacturer, Contact)perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0,