Perma FLEX S60 Lubricant dispenser with high performance oil SO14

Perma Flex S60 Lubricant dispenser with oil SO14 | N° 107246Perma High performance oil SO14 High-temperature chain oilEfficient lubrication even at high operating temperaturesGood regeneration effect on used oilFavorable viscosity-temperature properties for safe cold startsOutstanding penetration properties for rapid formation of the lubricating filmGood adhesion, no throwing offResistance to wear and pressureLittle residue owing to fully synthetic constituentsEfficient against the settling of finishing and softening compounds and their condensates at the point of frictionTechnical specificationsChemical composition, type of oil: ester oilChemical composition, type of oil: synthetic hydrocarbon oilUpper service temperature: 250 °C / 482 °FAppearance: clearDensity, DIN 51757, 20 °C: approx. 0.95 g/cm³Colour space: greenFlash point, DIN EN ISO 2592, Cleveland, open-cup apparatus: >= 220 °CKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C: approx. 28 mm²/sKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C: approx. 320 mm²/sViscosity index, DIN ISO 2909: >= 110ApplicationsPerma High performance oil SO14 is suitable for all oil-lubricated tenter chains such as roller chains, chains or clips with ball bearings in cases of combined lubrication of bearings, chain joints and slide ways), and slide chains with lubrication of slide rails, chain joints and bolts in equalizing frames, single-layer tenters, tier tenters, festoon driers and steamers as well as installations.Perma Flex S60 Lubricant dispenserThe automatic lubrication system perma FLEX is available in two convenient sizes (60 cm³ / 125 cm³).It can be used for inside or outside applications at temperatures ranging from -20 °C to +60 °C.Discharge period setting is flexible and can be adjusted from 1 – 12 months using the dial on top of the lubricator.Perma FLEX comes fully assembled and ready-to-use. Simply turn the dial to the desired discharge period and the system is activated.The electronically controlled chemical reaction will build up the pressure that is necessary to continually supply the lubrication point with fresh lubricant. Information on product safety (Manufacturer, Contact)perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0,