Perma Flex S60 Lubricant dispenser with Microlube GB 0

Perma Flex S60 Lubricant dispenser with Microlube GB 0 | N° 107236Klüber Microlube GB 0 Universal high-performance lubricantHigh pressure absorption capacityGood wear protectionGood anticorrosion behaviourPumpable through centralized systemsTechnical specificationsTexture: homogeneous Color space: red Appearance: transparent Density at 20 °C: approx. 0.90 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value: 355 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value: 385 x 0.1 mm Base oil viscosity at 40 °C, calculated value: approx. 590 mm²/s Base oil viscosity at 100 °C, calculated value: approx. 31.5 mm²/s Shear viscosity at 25 °C, shear rate 300 s-1; equipment:rotational viscometer: approx. 3 000 mPas Drop point, DIN ISO 2176, IP 396: > 180 °C Flow pressure of lubricating greases, DIN 51805, test temperature: -25 °C: < 1 400 mbarApplicationsMICROLUBE GB 0 was especially developed for friction points subject to high loads and mixed friction conditions. It is a universal grease suitable for the lubrication of eccentric presses (e.g. make Müller-Weingarten), heavy-duty spur and bevel gears with steel/steel components (e.g. gear motors that are not oiltight), slideways, guides and sump lubricated rolling bearings.Perma Flex S60 Lubricant dispenserThe automatic lubrication system perma FLEX is available in two convenient sizes (60 cm³ / 125 cm³).It can be used for inside or outside applications at temperatures ranging from -20 °C to +60 °C.Discharge period setting is flexible and can be adjusted from 1 – 12 months using the dial on top of the lubricator.Perma FLEX comes fully assembled and ready-to-use. Simply turn the dial to the desired discharge period and the system is activated.The electronically controlled chemical reaction will build up the pressure that is necessary to continually supply the lubrication point with fresh lubricant.Hazard Information (CLP)Signal word: WarningHazard statements (H-codes)H319: Causes serious eye irritation.Precautionary statements (P-codes)Prevention:P264: Wash skin thoroughly after handling.P280: Wear eye protection/face protection.Response:P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337 + P313: If eye irritation persists: Get medical advice/attention.Additional Labelling (EUH-codes)EUH208: Contains dibutyl[[bis[(2-ethylhexyl)oxy]phosphinothioyl]thio]succinate. May produce an allergic reaction. Information on product safety (Manufacturer, Contact)perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0,