Perma FUTURA 120 Lubricant dispenser with high performance oil SO14

Perma FUTURA 120 Lubricant dispenser with SO14 | N° 107083Perma High performance oil SO14 High-temperature chain oilEfficient lubrication even at high operating temperaturesGood regeneration effect on used oilFavorable viscosity-temperature properties for safe cold startsOutstanding penetration properties for rapid formation of the lubricating filmGood adhesion, no throwing offResistance to wear and pressureLittle residue owing to fully synthetic constituentsEfficient against the settling of finishing and softening compounds and their condensates at the point of frictionTechnical specificationsChemical composition, type of oil: ester oilChemical composition, type of oil: synthetic hydrocarbon oilUpper service temperature: 250 °C / 482 °FAppearance: clearDensity, DIN 51757, 20 °C: approx. 0.95 g/cm³Colour space: greenFlash point, DIN EN ISO 2592, Cleveland, open-cup apparatus: >= 220 °CKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C: approx. 28 mm²/sKinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C: approx. 320 mm²/sViscosity index, DIN ISO 2909: >= 110ApplicationsPerma High performance oil SO14 is suitable for all oil-lubricated tenter chains such as roller chains, chains or clips with ball bearings in cases of combined lubrication of bearings, chain joints and slide ways), and slide chains with lubrication of slide rails, chain joints and bolts in equalizing frames, single-layer tenters, tier tenters, festoon driers and steamers as well as installations.Perma FUTURA Lubricant dispenser Perma FUTURA is a single-point lubrication system for roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains, etc.Operates at ambient temperatures between 0 up to +40 °C.Perma FUTURA has a corrosion-proof plastic housing which makes it ideal for hygienically clean applications (e. g. food and chemical industry).The reliable operating principle is based on an electrochemical reaction.The lubrication period is determined by color coded activator screws.Depending on your application’s requirement, you may choose to discharge 120 cm³ in a period of 1, 3, 6 or 12 months.The activator screw generates pressure (max. 4 bar) which moves the piston forward and continuously injects small lubricant amounts into the lubrication pointQuick and easy exchange without special toolsNote: For each FUTURA dispenser you need an activator screw, which you can order under the links below: ( ;  ;  ; ) Information on product safety (Manufacturer, Contact)perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0,