Perma FUTURA 120 Lubricant dispenser with Petamo GHY 133 N

Perma FUTURA 120 Lubricant dispenser with Petamo GHY 133 N | N° 107067Petamo GHY 133 N  Long-term and high-temperature grease for rolling bearingsResistance to high temperaturesHigh resistance to oxidationEfficient wear protection even at high temperaturesGood corrosion protectionGood water resistanceReduced maintenance due to lifetime lubricationWide service temperature range allows a variety of applicationsReliable operation and long service life due to excellent protection against wear and corrosion, especially in water pump bearings and clutch release bearings Technical specificationsChemical composition, type of oil: synthetic hydrocarbon oilChemical composition, type of oil: mineral oilChemical composition, thickener: polyureaLower service temperature: -40 °C / -40 °FUpper service temperature: 160 °C / 320 °FColour space: brownDensity at 20 °C: approx. 0.90 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value: 265 x 0.1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value: 295 x 0.1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C: approx. 165 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C: approx. 18 mm²/sDrop point, DIN ISO 2176, IP 396: >= 250 °CSpeed factor (n x dm): approx. 500 000 mm/minApplicationsRolling bearings inElectric motorsFan heatersDrying installationsTextile machinesPaper machinesAutomotive components, e.g.Belt tensioning rollers (rotating outer ring)CouplingsWater pumpsFansWheel bearingsPerma FUTURA Lubricant dispenser Perma FUTURA is a single-point lubrication system for roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains, etc.Operates at ambient temperatures between 0 up to +40 °C.Perma FUTURA has a corrosion-proof plastic housing which makes it ideal for hygienically clean applications (e. g. food and chemical industry).The reliable operating principle is based on an electrochemical reaction.The lubrication period is determined by color coded activator screws.Depending on your application’s requirement, you may choose to discharge 120 cm³ in a period of 1, 3, 6 or 12 months.The activator screw generates pressure (max. 4 bar) which moves the piston forward and continuously injects small lubricant amounts into the lubrication pointQuick and easy exchange without special toolsNote: For each FUTURA dispenser you need an activator screw, which you can order under the links below: ( ;  ;  ; )Hazard statements (CLP)Signal word: WarningHazard statements (H-phrases)H410: Very toxic to aquatic life with long lasting effects.Safety precautions (P-phrases)Prevention:P273: Avoid release to the environment.Response:P391: Collect spillage.Additional labeling (EUH-phrases)EUH208: Contains condensation products of fatty acids, tall oil with 2-amino-2-ethylpropanediol. May cause allergic reactions.Storage and disposalThis substance/mixture contains components classified as persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB).This substance/mixture contains components identified under Article 57(f) of the REACH regulation, Commission Regulation (EU) 2018/605, or Commission Delegated Regulation (EU) 2017/2100 as endocrine-disrupting for the environment.Other relevant informationThis substance/mixture contains no components with endocrine-disrupting properties according to REACH Article 57(f) or Commission Delegated Regulation (EU) 2017/2100 or 2018/605 in concentrations of 0.1% or more.Klüber Petamo GHY133N, Petamo GHY 133N, GHY-133-N, GHY-133 N Information on product safety (Manufacturer, Contact)perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0,