Perma PRO LC500 Lubricant cartridge with grease Tribol GR 100-2 PD

Perma PRO LC500 Lubricant cartridge with Tribol GR 100-2 PD | N° 111724Castrol Tribol GR 100-2 PD High performance bearing greases​Castrol Tribol™ GR 100 PD (previously called Longtime™ PD) is a range of lithium based greases containing highly refined mineral oils, enhanced with the MicroFlux Trans (MFT) additive system.Technical specifications Appearance: Brown Thickener type: Lithium Base oil:  Mineral oil Consistency NLGI Grade: 2 Density @ 20 °C/68 °F  kg/m³: 890 Worked Penetration (60 strokes @ 25 °C/77 °F): 265-295 Base Oil Viscosity @ 40 °C/104 °F: 95 Flow pressure @ -35 °C/-31 °F  hPa: 1200ApplicationsThe Tribol GR 100 PD Range can be used for long term lubrication even under the most difficult operating conditions such as extreme pressure, vibrations, shock loads and a wide temperature range (-35°C to 140°C / -31°F to 284°F) in highly loaded rolling and sliding bearings.Typical applications include bearings of spinning and grinding spindles, gear motors exposed to shock loads, screening / wood shaping machines and bearing surfaces of printing plates.These greases are also suitable for bearings with a rotating outer ring and undergoing high stresses due to centrifugal load. ​Perma PRO ​Multi-Point Lubrication Systems:​PRO MP-6PRO MP-6 is a battery operated multi-point lubrication system.The MP-6 distributor discharges directly without pressure loss and enables tube extensions up to 5 m. PRO MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems in robots.Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.Power supply: Battery PRO BPRO C MP-6PRO C MP-6 can also be operated in IMPULSE mode.The impulse for a lubricant discharge can be PLC controlled.Power is supplied via the machine and can be PLC monitored and controlled.PRO C MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems (with same size runner blocks) in robots.Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.Power supply: External: 15–30 VPRO LINEPRO LINE is a special multi-point lubrication system for linear guides. Main applications for the multi-point lubrication system perma PRO LINE are linear guides.Application fields range from various linear guide and drive units in all kinds of industries – from automotive to paper. Other applications are roller and sliding bearings, open gears and spindles.Power supply: Battery PRO BPRO C LINEPRO C LINE is a special multi-point lubrication system with 1 – 6 outlet connections for linear guidesPRO C LINE receives its power from the machine and can be monitored and controlled via PLC.Main applications for the multi-point lubrication system perma PRO C LINE are linear guides.Application fields range from various linear guide systems and drives in the automotive industry to the paper industry. Other applications are roller and sliding bearings, open gears and spindles.Power supply: External: 15–30 VHazard Information (CLP)Signal word: Warning.Hazard statements (H-phrases)H317: May cause an allergic skin reaction.H412: Harmful to aquatic life with long lasting effects.Precautionary statements (P-phrases)Prevention:P280: Wear protective gloves.P273: Avoid release to the environment.P261: Avoid breathing dust.Response:P362 + P364: Take off contaminated clothing and wash it before reuse.P302 + P352: IF ON SKIN: Wash with plenty of soap and water.P333 + P313: If skin irritation or rash occurs: Get medical attention.Disposal:P501: Dispose of contents and container in accordance with all local, regional, national, and international regulations.Supplemental label elementsNot applicable.Hazardous ingredientsReaction product of ammonium molybdate and C12-C24-diethoxylated alkylamine (1:5-1:3).Reaction products of triphenyl phosphite and isodecanol (1:1).2,6-di-tert-butyl-4-nonylphenol.  Information on product safety (Manufacturer, Contact)perma-tec GmbH & Co. KG, Hammelburger Str. 21, 97717 Euerdorf, Deutschland, +49 9704 609-0,