Shell Gadus S2 V220 2 Extreme pressure general purpose grease 400g

Shell Gadus S2 V220 2 (NLGI 2) greases are high quality multipurpose, extreme-pressure greases based on a blend of high viscosity index mineral oils and a lithium hydroxystreate soap thickener and contain extreme-pressure and other proven additives to enhance their performance in a wide range of applications.Shell Gadus S2 V220 greases are designed for multipurpose grease lubrication of rolling element and plain bearings as well as hinges and sliding surfaces such as those found in throughout most industrial and transport sectors.Performance, Features & BenefitsOutstanding Load Carrying Capacity Shell Gadus S2 V220 greases contain special extremepressure additives which enable them to withstand heavy and shock loads without failure of the lubricant film.Improved Mechanical Stability This is particularly important in vibrating environments where poor mechanical stability can lead to grease softening with subsequent loss of lubrication performance and leakage.Good Resistance to Water Wash-out Shell Gadus S2 V220 greases have been formulated to offer resistance to water wash-out.Oxidation Stability Specially selected base oil components have excellent oxidation resistance. Their consistency will not alter in storage and they withstand high operating temperatures without hardening or forming bearing deposits.Good Corrosion Resistance CharacteristicsShell Gadus S2 V200 greases reliably protect bearing surfaces against corrosion, even when a high amount of water is presentMain ApplicationsHeavy duty bearings and general industrial lubricationHeavy duty plain and rolling element bearings operating under harsh conditions including shock loading in wet environmentsSpecifications, Approvals & RecommendationsFor a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk.Health, Safety & Environment Shell Gadus S2 V100 Grease is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained.Avoid contact with skin.Use impervious gloves with used oil.After skin contact, wash immediately with soap and water.Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained fromhttp://www.epc.shell.com/Protect the EnvironmentTake used oil to an authorised collection point. Take used oil to an authorised collection point. Do not discharge into drains, soil or water.Technical specificationsNLGI Consistency: 2Soap Type: LithiumBase Oil (Type): MineralKinematic Viscosity @40 C cSt IP 71 / ASTM D445: 220Kinematic Viscosity @100C cSt IP 71 / ASTM D445: 19Cone Penetration, Worked @25 C 0.1mm IP 50 / ASTM D217: 265-295Dropping Point 0 C IP 396: 180 Information on product safety (Manufacturer, Contact)Shell Deutschland Oil GmbH, Suhrenkamp 71-77, 22335 Hamburg, GERMANY, +49 40 6324-6255, , www.shell.com