Sika Aktivator-205 Cleaning and activation 1l

Technical characteristics: Chemical Type: solvent-based adhesiveColor: colorless, clearDensity (DIN 51 757 / ISO 2811-1): 0.8 kg / lFlash point (DIN 51 755 / ISO 13736): + 12°CWorking temperature: + 5°C to + 40°CApplication method: wipe with a lint-free paper towelConsumption: about 30 – 60 ml / m²Flash-off time: 10 minStorage conditions: less than + 25°C sealed in a cool and dryShelf life: 12 monthsDescription:Sika Activator 205 is an alcoholic solution with active substance liable to Akti-vation of bonding surfaces before bonding and sealing with Sikaflex products.Sika Activator 205 9001/14 001 and the Responsible Care program fro-submitted after qualifying assurance system ISO.Scope:Activation of the following non-porous sub-reasons: metals, plastics, enameled glass (ceramic), coated substrates.This product is the applica-suited to advanced. In order to ensure adhesion and material compatibility, preliminary tests with the original materials under the respective conditions must be routed through.Processing:Wipe the contact area with a clean cloth dampened with Sika Activator 205 paper-fleece. Change after each wipe paper towel.If the substrates to be bonded adhesively not after 2 hours, must be re-primed with Sika Activator 205 (max 2 times.).The ideal processing and surface temperature is + 15°C to + 25°C.The consumption depends on the substrates and manufacturing processes.Containers immediately after use tightly again.In case of continuous exposure to air humidity-activity Sika Activator 205 is cloudy and therefore inactive. The milky product must not be used.The evaporation time is of the order-dependent ambient conditions and temperature.Hazard Statements (CLP)Signal word: Danger.Hazard Statements (H-Sentences)H225: Highly flammable liquid and vapour.H319: Causes serious eye irritation.H336: May cause drowsiness or dizziness.Precautionary Statements (P-Sentences)Prevention:P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.P233: Keep container tightly closed.P261: Avoid breathing mist or vapour.P280: Wear protective gloves/protective clothing/eye protection/face protection.Response:P303 + P361 + P353: IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.P370 + P378: In case of fire: Use dry sand, powder, or alcohol-resistant foam to extinguish.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)Sika Deutschland GmbH, Kornwestheimer Str. 103-107, 70439 Stuttgart, GERMANY, +49 711 8009-0, , www.sika.com