Sundström SR518 Gas filter A2 for the respirators SR500 / SR500EX

Filter for protection against gases and fumes with optimized adsorptionThe SR 518 A2 gas filter are intended for use with the Powered air purifying respirator / fanProtects against organic gases and vapours, such as solvents, with boiling points > +65 °CTypical application area is painting workFilter can be easily combined with SR 510 particle filter P3Note: The SR 500/SR 500 EX fan unit must always be used with two particle filters or two combined filters consisting of gas filters and particle filtersTechnical SpecificationsReference number: H02-7012Color: BlackShelf life (in years): 5Country of manufacture: SwedenOperating temperature: -10 – +55 °C, < 90 % RHStorage temperature: -20 - +40 °C, < 90 % RHModel: SR 518Overview Table of Filter ClassesFilter ClassMeaningTypical Application / ProtectionParticulate Filters (P Classes)P1For coarse mechanically generated particles(up to 4 times the limit value)Grinding, milling, drillingP2For finer mechanical and thermal particles(up to 10 times the limit value)Welding, soldering, fine dustP3For highly toxic or very fine particles(up to 30 times the limit value)Asbestos, mold, viruses, nanoparticlesGas and Vapor Filters (A–K, Hg, AX)A*Organic vapours (boiling point > 65 °C)General protection against solventsA1*Like A, with lower capacityWater-based paints, paints with residual solventsA2*Like A, with higher capacityPetrol, paint thinners, solvent-based paints, adhesivesBInorganic gases/vapoursChlorine, hydrogen sulphide, hydrogen cyanideEAcid gases/vapoursSulphur dioxide, hydrochloric acid, acid mistsKAmmonia and derivativesFertilizers, slurry, laboratory processesHgMercury vapourLaboratory accidents, hazardous waste (max. 50 h use)AXOrganic vapours (boiling point < 65 °C)Highly volatile solvents (only with full-face mask)Additional MarkingsRReusableSuitable for multiple work shiftsNRNot reusableApproved for one work shift onlyDDolomite dust test passedIncreased service life under high dust load* Note: Please ensure that the selected respiratory protective equipment is suitable for the specific hazardous substance and its concentration before use, in ac Information on product safety (Manufacturer, Contact)Sundström Safety AB, Västergatan 4, 341 50 Lagan, SWEDEN, +46 10 484 87 00, , www.srsafety.com