Wacker Elastosil E41 Silicone Rubber RTV-1 transparent 310ml

ELASTOSIL® E41 TRANSPARENT is a flowable, one-component silicone rubber with excellent mechanical properties, which cures at room temperature under the influence of atmospheric moisture (RTV-1).Pack Size: 310 ml cartridgeAlso available in: 90 ml tubeApplicationsMultipurpose sealant and adhesive for general industry and electronics for FIPG applicationsParticularly suitable as adhesive on cured rubber or silicone coated textiles like seam sealingFeaturesExcellent adhesion on cured silicone rubberSelf-levellingSolvent containingHigh-tear gradeRecommended service temperature from -45 °C to 180 °CMax. recommended short term peak temperature exposure 200°CTechnical specificationsProperties not vulcanizedColortransparent Density, 23 °C1,08 g/cm³Dynamic viscosity D = 1 1/s, 25 °C100000 mPa·sDynamic viscosity D = 25 1/s, 25 °C80000 mPa·sSkin formation time10 – 20 minCuring time, 23 °C | 50 % r.h12 h/mm Properties vulcanizedCuring Conditions: 14 days at 23 °C and 50 % rel. humidity, 2 mm sheet, no post-curingColortransparent Density in water, 23 °C1,12 g/cm³Shore A40 Tear strength, Type 3 / 23°C / 2mm6,0 N/mm²Elongation at break, Type 3 / 23°C / 2mm350 %Fields of applicationAppliances Industry, e.g. microwave ovensIndustrial Assembly, e.g. Automotive, Aerospace, RailwayReady-to-Use Silicone Sealants – General ApplicationsSpecial Purpose Sealants Wacker ELASTOSIL® E-41 TRANSPARENT, ELASTOSIL E41, E/41Hazard Warnings (CLP)Signal word: DangerHazard Statements (H-phrases)H225: Highly flammable liquid and vapor.H315: Causes skin irritation.H319: Causes serious eye irritation.H361d: Suspected of damaging the unborn child.H373: May cause damage to organs through prolonged or repeated exposure.H412: Harmful to aquatic life with long-lasting effects.Safety Statements (P-phrases)Prevention:P201: Obtain special instructions before use.P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.P233: Keep container tightly closed.P243: Take precautionary measures against static discharge.P260: Do not breathe vapor/aerosol.P273: Avoid release to the environment.P280: Wear protective gloves/protective clothing/eye protection.Response:P302+P352: If on skin: Wash with plenty of water and soap.P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P313: Get medical advice/attention.Storage:P405: Store locked up.Other HazardsNo other hazards are known.Endocrine-disrupting properties – human health: No relevant components according to REACH regulation.Endocrine-disrupting properties – environment: No relevant components according to REACH regulation.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)Wacker Chemie AG, Gisela-Stein-Strasse 1, 81671 München, GERMANY, +49 89 6279-0, , www.wacker.com