Wacker Elastosil E41 Silicone Rubber RTV-1 transparent 90ml

ELASTOSIL® E41 TRANSPARENT is a flowable, one-component silicone rubber with excellent mechanical properties, which cures at room temperature under the influence of atmospheric moisture (RTV-1).Pack Size: 90 ml TubeAlso available in: 310 ml cartridgeApplicationsMultipurpose sealant and adhesive for general industry and electronics for FIPG applicationsParticularly suitable as adhesive on cured rubber or silicone coated textiles like seam sealingFeaturesExcellent adhesion on cured silicone rubberSelf-levellingSolvent containingHigh-tear gradeRecommended service temperature from -45 °C to 180 °CMax. recommended short term peak temperature exposure 200°CTechnical specificationsProperties not vulcanizedColortransparent Density, 23 °C1,08 g/cm³Dynamic viscosity D = 1 1/s, 25 °C100000 mPa·sDynamic viscosity D = 25 1/s, 25 °C80000 mPa·sSkin formation time10 – 20 minCuring time, 23 °C | 50 % r.h12 h/mm Properties vulcanizedCuring Conditions: 14 days at 23 °C and 50 % rel. humidity, 2 mm sheet, no post-curingColortransparent Density in water, 23 °C1,12 g/cm³Shore A40 Tear strength, Type 3 / 23°C / 2mm6,0 N/mm²Elongation at break, Type 3 / 23°C / 2mm350 %Fields of applicationAppliances Industry, e.g. microwave ovensIndustrial Assembly, e.g. Automotive, Aerospace, RailwayReady-to-Use Silicone Sealants – General ApplicationsSpecial Purpose Sealants Wacker ELASTOSIL® E-41 TRANSPARENT, ELASTOSIL E41, E/41Hazard Warnings (CLP)Signal word: DangerHazard Statements (H-phrases)H225: Highly flammable liquid and vapor.H315: Causes skin irritation.H319: Causes serious eye irritation.H361d: Suspected of damaging the unborn child.H373: May cause damage to organs through prolonged or repeated exposure.H412: Harmful to aquatic life with long-lasting effects.Safety Statements (P-phrases)Prevention:P201: Obtain special instructions before use.P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.P233: Keep container tightly closed.P243: Take precautionary measures against static discharge.P260: Do not breathe vapor/aerosol.P273: Avoid release to the environment.P280: Wear protective gloves/protective clothing/eye protection.Response:P302+P352: If on skin: Wash with plenty of water and soap.P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P313: Get medical advice/attention.Storage:P405: Store locked up.Other HazardsNo other hazards are known.Endocrine-disrupting properties – human health: No relevant components according to REACH regulation.Endocrine-disrupting properties – environment: No relevant components according to REACH regulation.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)Wacker Chemie AG, Gisela-Stein-Strasse 1, 81671 München, GERMANY, +49 89 6279-0, , www.wacker.com