Wacker Elastosil RT 480 Room temperature curing silicone rubber 1kg

ELASTOSIL® RT 480 Spreadable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature RTV-2 Package size: 1 kg can (manufacturer no. 60003750)ApplicationProduction of moldsSealing (FIPG)CharacteristicsSelf-levelling flowHigh Shore A hardness (approx. 55)High mechanical strengthVery good heat resistanceLow shrinkageProcessingELASTOSIL® RT 480 is cured by adding Catalyst T37 for long pot lives and curing times, or Catalyst T40 for short pot lives and curing times.Technical specifications Properties Uncured  Color light gray  Viscosity, dynamic 23 °C Brookfield 300000 – 400000 mPa·s Density 20 °C DIN 53217 approx. 1.2 g/cm³ Catalyzed  Viscosity, dynamic 23 °C ISO 3219 250000 mPa·s Mix ratio T 37 4 %  Mix ratio T 40  3 %  Pot Life 3% T 40  20 min Pot Life 4 % T 37  120 min Curing time 3% T 40  3 h  Curing time 4% T 37 9 h  Linear shrinkage 3% T 40 0.25 %  Linear shrinkage 4% T 37 0.5 % Properties Cured  Color light gray Density in water 23 °C ISO 2781 1.2 g/cm³  Tear strength   ASTM D 624 B > 7 N/mm Hardness Shore A  ISO 868 55 Tensile strength ISO 37 4.5 N/mm² Elongation at break ISO 37 170 %Fields of applicationIndustrial AssemblyReproduction MoldingPackaging and storageThe ‘Best use before end’ date of each batch is shown on the product label.Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.Wacker Elastosil RT480, ​Wacker Elastosil RT-480 Information on product safety (Manufacturer, Contact)Wacker Chemie AG, Gisela-Stein-Strasse 1, 81671 München, GERMANY, +49 89 6279-0, , www.wacker.com