WD-40 Classic Multi-use oil 100ml spray can with extension

WD-40® Classic 5-in-1 Multi-Use oil in handy 100ml spray can with extension tubeWD-40 Multi-Use product protects metal from rust and corrosion, penetrates stuck parts, displaces moisture, and lubricates almost anything. The WD-40 Multi-Use Product 100ml handy can is the perfect travel-sized problem solver.Temperature application range: -50 to +150 °C5-in-1 product: Rust RemoverLubricantContact sprayCleanerCorrosion protectionCharacteristicsCompatible with plastics, rubbers and all metalsGets under dirt, marks, and grease, making it easy to wipe them away. It also dissolves adhesives, allowing the easy removal of labels, tape, and stickersProtects metal surfaces with corrosion-resistant ingredients to shield against moisture and other corrosive elementsLubricating ingredients are widely dispersed, and hold firmly to all moving partsLoosens rust-to-metal bonds and frees stuck, frozen, or rusted metal partsBecause WD-40 displaces moisture, it quickly dries out electrical systems to eliminate moisture-induced short circuits (Remember to turn the power off before you spray)Silicone and chlorinated solvent freeNon-conductiveField of applicationGarden tools and implementsBattery connectionsBicycle frameDoor locks and hingesPower toolsEnginesAlloysExhaust systemsTechnical specificationsBoiling point (initial): 183°C (360°F)Color: Light amber cloudy liquidSolubility in water: InsolubleOdor: CharacteristicFreeze point/ pour point: <-63°C (-81°F ) (ASTM D-97)Vapor density: >1VOC: 24.5% by weightKinematic viscosity @ 38˚ C (100˚ F ) 2.8 cStAppearance: Aerosol – Aerosolized Liquid Bulk – LiquidFlashpoint: 59°C (138°F) (TCC)Flammable limits: LEL: 0.6% UEL: 8.0%Vapor pressure: Aerosol – 95-115 psi @ 21° C (70° F) Bulk – 1 psi @ 38° C (100° F) (ASTM D323)Specific gravity @ 25˚ C (77˚ F ) 0.81Operating temperature: -50°C to 150°C (-60° F to 300° F)Percent volatile: 70-75% by weightDielectric strength: 38,000 volts per 0.10 inch KbValue: 25 wet film thickness: 50 um (0.002 inch)Coverage: 600-1000 ft2 per galYou can find detailed information in our Hazard Statements (CLP)Signal word: Danger.Hazard Statements (H-codes)H336: May cause drowsiness or dizziness.H222: Extremely flammable aerosol.H229: Pressurized container: May burst if heated.Precautionary Statements (P-codes)Prevention:P101: If medical advice is needed, have product container or label at hand.P102: Keep out of reach of children.P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.P261: Avoid breathing vapor or aerosol.P271: Use only outdoors or in well-ventilated areas.Response:P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.P312: Call a POISON CENTER/doctor if you feel unwell.P331: Do NOT induce vomiting.Storage:P405: Store locked up.P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C.Disposal:P501: Dispose of contents/container in accordance with local regulations.Additional Labeling (EUH-codes)EUH066: Repeated exposure may cause skin dryness or cracking.Storage and DisposalStore in a cool, well-ventilated place.Dispose of in compliance with local regulations.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)WD-40 Company Limited Zweigniederlassung Deutschland, Siemensstrasse 21, 61352 Bad Homburg, GERMANY, +49 6172 677 450, , www.wd40.de