WD-40 Specialist Anti-Friction Dry PTFE 400ml Smart Straw spray

WD-40 Specialist® Anti-Friction Dry PTFE 400ml Smart Straw sprayAnti-Friction Dry PTFE Lubricant is perfect for high use or repetitive mechanisms that require protection from daily wear and tear, such as door and window tracks, chains and rollers, power tools, drill bits and lock mechanisms. It’s quick-drying, and sets as a clear film that won’t attract damaging elements like dust, dirt and oil. It also makes an extremely effective mould release agent. It works through a range of temperatures, from -45°C to 260°C, and is safe to use on metals, glass and plastics.CharacteristicsLubricates with PTFE (Polytetrafluoroethylene)Quick dries to a clear filmWon’t attract dust, oil or dirtProtects against wear and tearWorks as a mould release agentField of applicationLoosening locks and latchesLubricating door and window tracks and hingesImproving performance of rollers, chains, cogs and cablesImproving efficiency of power tool blades and drill bitsLubricating conveyor beltsLubricating thermoplastics and metal extrusionsAdvantages of WD-40 Smart StrawWith the Smart Straw applicator, you’ve got two ways to spray; use the flip up straw for hard to reach areas, such as inside chains,locks or rollers, then flip it down to use the wide angle spray eye for area coverage on surfaces. Whichever way you need to spray,you can rely on the clever 360° valve to work efficiently at every angle, even upside down.Technical specificationsAppearance: Slightly cloudy, deep yellow liquidOdour: Pleasant lemon odourSG: 0.71 – 0.74Discharge rate: 0.6 – 1.2 g/sTemperature range: Effective performance at temperatures from -45 ºC to +260 ºCSolubility: Not miscible with waterNSF category H2Flammability: Classed as extremely flammable under current legislationCompatibility: Suitable for most surfaces, including plastic, metal and glassLubrication ASTM D-4172: Scar depth 0.43 mmExtreme pressure lubrication ASTM 3233: 2310 lbCorrosion protection ASTM B-117: 40 % at 24h Hazard Warnings (CLP)Signal word: DangerHazard Statements (H-phrases)H315: Causes skin irritation.H336: May cause drowsiness or dizziness.H411: Toxic to aquatic life with long-lasting effects.H222: Extremely flammable aerosol.H229: Pressurised container: May burst if heated.Safety Statements (P-phrases)Prevention:P101: If medical advice is needed, have product container or label at hand.P102: Keep out of reach of children.P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.P261: Avoid breathing vapours/spray.P273: Avoid release to the environment.P280: Wear protective gloves.Response:P312: Call a POISON CENTER or doctor if you feel unwell.Storage:P405: Store locked up.P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50°C.Disposal:P501: Dispose of contents/container to an approved waste disposal plant.Other HazardsThe mixture contains no vPvB substances (vPvB = very persistent, very bioaccumulative).The mixture contains no PBT substances (PBT = persistent, bioaccumulative, toxic).The mixture contains no substances with endocrine-disrupting properties.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)WD-40 Company Limited Zweigniederlassung Deutschland, Siemensstrasse 21, 61352 Bad Homburg, GERMANY, +49 6172 677 450, , www.wd40.de