Weicon Easy-Mix HT 250 2-component epoxy adhesive grey 50ml cartridge

WEICON Easy-Mix HT 250 Epoxy AdhesiveWEICON Easy-Mix HT 250 is a 2-component adhesive based on epoxy resin with a high temperature resistance up to +200 °C; briefly up to +250 °C.The 2-C epoxy resin system shows particularly high adhesion to metals and fibreglass. Its excellent suitability for special applications is demonstrated by the high thermal conductivity combined with the high temperature resistance. The adhesive keeps over 80 % of its strength even at constantly high temperatures. This enables the bonding of components, which are thermo-coated (powder-coated) after curing. High temperature resistance High thermal conductivity Long pot lifeProcessingWEICON Easy-Mix products can be processed straight from the double cartridge by means of the included static mixer. Dismiss the first 5 cm of the adhesive bead. The adhesive is applied to just one side. The specified pot life refers to a material batch of 10 ml at room temperature. Larger batch quantities will result in faster curing. Higher temperatures also reduce the pot life and curing time. (General rule: every increase by +10 °C above room temperature results in a decrease of the pot life and curing time by half). Temperatures below +16 °C increase the pot life and curing time significantly. From approx. +5C and below, no reaction takes place. Technical specificationsBase: epoxy resinTexture: viscousColour: light greyProcessing:Processing temperature: +10 °C to +40 °CCuring temperature: +10 °C bis +50 °CMixing ratio by volume: 2:1Viscosity of the mixture at +20 °C: 13.000 mPa·sDensity of the mixture: 2,1 g/cm³Gap bridging up to max.: 4 mmCuring:Pot life at 20 °C, 10 ml batch: 150 min.Working strength after (50 % strength): 8 hFinal strength (100 % strength): 24 (0,5 Std. | 80°C) hHazard Warnings (CLP)Signal word: WarningHazard Statements (H-phrases)H315: Causes skin irritation.H317: May cause an allergic skin reaction.H319: Causes serious eye irritation.H411: Toxic to aquatic life with long-lasting effects.Safety Statements (P-phrases)Prevention:P280: Wear protective gloves. Wear eye or face protection.P273: Avoid release to the environment.P261: Avoid breathing vapors.P264: Wash thoroughly after use.Response:P391: Collect spillage.P362 + P364: Take off contaminated clothing and wash before reuse.P302 + P352: IF ON SKIN: Wash with plenty of water.P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337 + P313: If eye irritation persists: Get medical advice/attention.Disposal:P501: Dispose of contents/container in accordance with local regulations.Other HazardsNo known hazards leading to classification.The product contains no PBT or vPvB substances as per Annex XIII of Regulation (EC) No 1907/2006.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)WEICON GmbH & Co. KG, Königsberger Strasse 255, 48157 Münster, GERMANY, +49 251 9322-0, , www.weicon.de