Castrol Hyspin HLP-D 32 Detergent hydraulic oil 20l canister

Castrol Hyspin HLP-D 32 Detergent hydraulic oil ISO VG 32The Hyspin™ HLP-D hydraulic oil range of lubricants are based upon highly refined mineral oil enhanced with a zinc additive system. They also contain detergent and dispersant additives.Volume: 20l canisterAlso available in: 208l barrelSpecifications / ApprovalsDIN 51502 (HLPD)ISO 6743/4 (HM) ApplicationHyspin HLP-D oils are for use primarily in machine tool hydraulic systems, gears and clutch drives and in mobile hydraulic systems used outdoors.These oils can tolerate high levels of water contamination, either from the outdoors environment or by water miscible cutting oils when used in machine tool equipment, and still provide effective lubrication. Such contamination can cause corrosion and seizure of hydraulic components. The detergent /dispersant properties of Hyspin HLP-D oils maintain the performance of hydraulic systems under these circumstances.In hydraulic cylinders operating at low speeds, Hyspin HLP-D oils prevent erratic movement and stick/slip between seals and shafts, greatly reducing seal wear.Hyspin HLP-D oils are suitable for mobile equipment where multi-disc clutches are employed, They permit higher torques to be transmitted, and maintain smooth clutch operation, short engagement times, and low rates of clutch wear.The Hyspin HLP-D range is fully compatible with common seal materials.AdvantagesSmooth functioning of sliding parts in hydraulic systems and machine toolsGood surface wetting properties provide smooth sliding of seals on hydraulic pistons and rods and reduces corrosionExcellent corrosion protection in arduous conditionsMaintains performance in ‘wet’ operating conditions, eg outdoor equipment, machining operationsTechnical specificationsDensity @ 15°C / 59°F ISO 12185 / ASTM D4052 kg/m3: 880Kinematic Viscosity @ 40°C / 104°F ISO 3104 / ASTM D445 mm²/s: 32Kinematic Viscosity @ 100°C / 212°F ISO 3104 / ASTM D445 mm²/s: 5.4Viscosity Index ISO 2909 / ASTM D2270: >95Pour Point ISO 3016 / ASTM D97 °C: -30Flash Point – open cup method ISO 2592 / ASTM D92 °C: 220Size: 20 LiterPackaging type: canisterAlso available in: 208l barrelGLIS number: 15BE49MSDS number: 467032 Information on product safety (Manufacturer, Contact)BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, , www.bp.com