Castrol Spheerol LMM Lithium based bearing grease 18kg bucket

Castrol Spheerol™ LMM 2 is a multi-purpose lithium grease (NLGI 2) containing molybdenum disulphide solid lubricant to enhance its load carrying properties under conditions of high or shock loading or to prevent scuffing or fretting. It contains oxidation and corrosion inhibitors, anti-wear additives, has good mechanical stability and can be used in the presence of moisture.Volume: 18kg bucketAlso available in: , 50kg barrelApplicationSpheerol LMM grease is suitable for most types of bearing and a wide range of other industrial applications, which require a molybdenum disulphide grease, including grease lubricated gears. Spheerol LMM may be used in plain and rolling element bearings, including heavily loaded bearings at low and medium speeds, and those subject to shock loading and excessive vibrations. The incorporation of solid lubricant in Spheerol LMM greases makes this grease particularly suited for the lubrication of reciprocating and sliding motion elements, where the prevention of scuffing and fretting is desirable. Typical applications include pivot pins, cams, screws, splined shafts, slides, flexible joints (ball, universal, CV joints etc). It is also useful for the lubrication of chains, swivels and shackles to prevent scuffing.AdvantagesGood load carrying capacity – protects equipment against extreme loading and helps prevents damage caused by shock loading and excessive vibrationResistance to scuffing and fretting – provides protection against fretting that can occur on splined shafts, pivot pins and other parts subject to reciprocating and sliding motionGood water resistance – the grease film remains on the surface even in the presence of waterResistant to copper and steel corrosion – helps prevent rust and oxidation on metal surfacesHigh mechanical stability – the grease keeps its consistency in service ensuring long term protectionGood adhesion – continuous lubrication and reduced consumption as film stays between lubricated surfacesTechnical specificationsThickener type: LithiumBase oil type: MineralConsistency ASTM D217 NLGI: 2Colour: Dark grey/blackBase oil viscosity @ 40˚C ASTM D445 mm²/s: 150-200Dropping point IP396 °C: 180 minWorked penetration60 strokes @ 25˚C ASTM D217 0.1 mm: 265-295Working stability 60 / 100,000 strokes @ 25˚C ASTM D217 0.1 mm: 30 maxGLIS number: 15C57FMSDS code: 451363 Information on product safety (Manufacturer, Contact)BP Europa SE, Erkelenzer Straße 20, 41179 Mönchengladbach, GERMANY, +49 800 7235 074, , www.bp.com