DELO-QUICK 5975 Solvent-free activator 200g

DELO-QUICK 5975 Solvent-free activatorBeing solvent-free, the new activator eliminate the risk of solvent vapors emerging and the associated impact on human health and environment. No extraction systems are required in production and there is no need for explosion protection measures. In addition, the fluorescent agents contained in the activator –  a reddish one in DELO-QUICK 5975 – allow the application process to be monitored visually via a camera, ensuring quality assurance.Another advantage is that the activator improve humidity resistance when bonding metals such as stainless steel or aluminum. With DELO-QUICK 5975, this is even the case for nickel, which is considered to be difficult to bond because of its different coatings.Activators reduce the curing time of metal adhesives, which achieve their strength under exclusion of oxygen. However, in contrast to metal adhesives or other reaction adhesives, most activators contain solvents. As a result, these activators must first evaporate for a few minutes until the solvent has volatilized and the system has dried.This is not necessary for the higher-viscous DELO-QUICK 5975. Can be processed using the wet-on-wet method, without previous evaporation. The components can be joined directly after dispensing the activator. They can be further processed immediately, which reduces the cycle time in the production process.Can be easily processed and applied by means of a rotor spray, an endless-piston dispenser, a pinch valve, brush coating, or spray coating.  Hazard Identification (CLP)Signal word: Warning.Hazard Statements (H-Sentences) Causes skin irritation. May cause allergic skin reactions. Causes serious eye irritation. May cause respiratory irritation.Precautionary Statements (P-Sentences)Prevention: Wear protective gloves (1-4 hours breakthrough time: recommended Viton® fluoroelastomer / short-term exposure < 15 min nitrile gloves). Wear eye protection or face protection. Avoid inhaling vapors. Wash thoroughly after use.Response: If inhaled: Seek medical advice if feeling unwell, call a Poison Center or a doctor. Remove contaminated clothing and wash before reuse. If on skin: Wash with plenty of water and seek medical advice if irritation occurs. If in eyes: Rinse carefully with water for several minutes. Remove contact lenses if possible. Continue rinsing and immediately seek medical advice if irritation persists.Storage and Disposal Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with local, regional, national, and international regulations.Other Relevant Information Contains: Methacrylic acid, monoester with Propan-1,2-diol, Methacrylic acid, Propylidynetrimethanol, ethoxylated, esters with acrylic acid, reaction products from Phosphorpentoxide and Methacrylic acid-2-hydroxyethyl ester. Information on product safety (Manufacturer, Contact)DELO Industrie Klebstoffe GmbH & Co. KGaA, DELO-Allee 1, 86949 Windach, GERMANY, +49 8193 9900-0, , www.delo.de