Isoflex Topas NB 52 Synthetic rolling and plain bearing greases 370g

Synthetic long-term greaseISOFLEX TOPAS NB 52 and ISOFLEX TOPAS NB 152 are rolling and plain bearing greases based on a synthetic hydrocarbon oil and a barium complex soap. The special barium-soap thickener used in the ISOFLEX TOPAS NB 52 and 152 greases offers good load-carrying capacity as well as resistance to water and ambient media unlike other soap-based thickeners. Both products show good protection against corrosion as well as oxidation and ageing stability. The Klüber barium complex soap is ELINCS-registered and approved by GASG (Global Automotive Stakeholders Group).ISOFLEX TOPAS NB52 is suitable for temperatures between -50 °C to 120 °C and short peak temperatures up to 150 °C depending on the application, e.g. enclosed gears, car seat adjustment mechanisms.Size: 370g cartridgeAvailable in 370 g cartridge , 1kg can, 25kg bucketBenefits for your applicationLonger component life when exposed to water or aqueous media due to special thickenerMany years of successful use in the automotive and machine building industriesApplicationISOFLEX TOPAS NB 52 is a versatile grease for many applications, e.g.Rolling and plain bearings subject to high speeds and loads, also for low temperatures,Tooth flanks in precision gears, e.g. bevel gears in milling machines, electromechanical actuators for valves,Electric contacts and components to reduce insertion forces.Application notesThe greases are applied by spatula, brush, grease gun or cartridge. Sprays should not be exposed to direct sunlight and temperatures above 50 °C.Product dataArticle number004131Chemical composition, thickenerbarium complex soapChemical composition, type of oilsynthetic hydrocarbon oil Lower service temperature -50 °C / -58 °F Upper service temperature 120 °C / 248 °F Color space beige Texture homogeneous Texture short-fibred Density at 20 °C approx. 0.96 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 30 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 5.9 mm²/s Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 4 000 mPas Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 8 000 mPas Corrosion inhibiting properties of lubricating greases, DIN51802, (SKF-EMCOR), test duration: 1 week, distilled water 0 corrosion degree Copper corrosion, DIN 51811, (lubricating grease), 24h/100°C 1 – 100 corrosion degree Oil separation, ASTM D 6184 [FTMS 791 C 321], after 30h/100 °C <= 3 % by weight Drop point, DIN ISO 2176 >= 240 °C Oxidation stability of lubricating greases, ASTM D942, 100 h/99 °C, pressure drop <= 0.3 bar Speed factor (n x dm) approx. 1 000 000 mm/min Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating <= 1 - 90 Minimum shelf life from the date of manufacture - in a dry, frostfree place and in the unopened original container, approx. 36 months Hazard Information (CLP)Signal Word: WarningHazard Statements (H-phrases)H302 + H332: Harmful if swallowed or inhaled.Precautionary Statements (P-phrases)Prevention:P264: Wash hands thoroughly after handling.P270: Do not eat, drink, or smoke when using this product.P271: Use only outdoors or in a well-ventilated area.Response:P301 + P312 + P330: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.P304 + P340 + P312: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.Hazardous ComponentsReaction mixture of hydrogenated tallow alkylamines with sebacic acid and barium hydroxide Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com