Klüber BARRIERTA L 55/3 High-temperature long-term grease NLGI 3, 800g

BARRIERTA L 55/3 High-temperature long-term grease NLGI 3 | N° 090014BARRIERTA L 55/0-3 series long-term greases offer excellent resistance to high temperature and aggressive media and at the same time compatibility with plastics and elastomers.The lubricants were developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. BARRIERTA L 55/0-3 are NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The use of BARRIERTA L 55/0-3 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.Service temperature: -40 °C to +260 °CSize: 800g cartridgeAvailable in 1kg can, 10kg bucket, 30kg bucketAdvantages for your applicationHigher machine availability and less need for maintenanceat very high operating temperatures up to 260 °Cunder the influence of aggressive media and vapourswhen used with plastics and sealing materialsReliable operation in numerous industries and component typesthanks to BARRIERTA base oils, which are made specifically to enable long-term stabilitybacked by a large number of approvals and references for various applicationsfour consistency classes to suit different applicationsApplicationRolling and plain bearings subject to high temperatures One of the well-known strengths of the BARRIERTA L 55 series is the products’ suitability for the lubrication of bearings and guides operating under extreme temperatures. A low evaporation rate enables longest grease lives and hence longest relubrication intervals.In addition to their resistance to media, BARRIERTA L 55/2 and BARRIERTA L 55/3 offer also good adhesion and a sealing effect, which makes them suitable for application invalves, fittings and installations e.g. in the chemical industrypneumatic componentslevel gauges, e.g. for fuels or chemicalsseals (static, dynamic)extraction systemsApplication notesFor optimum results we recommend cleaning all friction points with white spirit 180/210 and then with Klüberalfa XZ 3-1 or Klüberalfa NH1 XZ 3-1 prior to initial lubrication. Subsequently, the friction points should be dried with clean dry compressed air or hot air to remove all solvent residues.The friction point must be free from oil, grease, perspiration and contamination particles before initial lubrication.Technical specifications Manufacturer number 0900140608 Colour space  white Service temperature, lower limit  -30 °C Service temperature, upper limit 260 °C NSF H1 registration number 129562 Density, Klüber method: PN 024, 20°C approx. 1.96 g/cm³ NLGI grade, DIN 51818 3 Kinematic viscosity of the base oil, DIN EN ISO 3104 /DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 40 mm²/s Kinematic viscosity of the base oil, DIN EN ISO 3104 /DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 420 mm²/sBARRIERTA L55/3, BARRIERTA L 55 3, BARRIERTA L 55-3 Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com