Klüber Centoplex CX 4/375 AU High-speed grease for gears 400g

High-speed grease for gearsCENTOPLEX CX 4/375 is a special lubricating grease based on mineral oil and lithium soap. It is a very soft grease of consistency grade 0.Size: 400g cartridgeAvailable in  400g cartridge, 1kg can, 25kg bucketBenefits for your application:For small gears subject to high peripheral speedsShear stableGood oil separation at low temperaturesApplication:Being a grease of very low consistency CENTOPLEX CX 4/375 AU is suitable for small gears subject to high speeds, especially bevel gears in right angle grinders. At temperatures < 80°C long-term lubrication is possible.Application notes:CENTOPLEX CX 4/375 AU can be applied onto the tooth flanks by brush in order to allow minimum quantity lubrication.Lubrication is also possible by providing a grease sump in the gear. Due to the good oil separation, wetting of the lubrication points in gears or bearings is ensured. CENTOPLEX CX 4/375 AU can also be applied through central automatic lubrication systems.Product data: Article number 020047 Chemical composition, type of oil mineral oil Chemical composition, thickener lithium soap Lower service temperature -30 °C / -22 °F Upper service temperature 120 °C / 248 °F Color space brown Appearance almost transparent Texture homogeneous Worked penetration, DIN ISO 2137, 25 °C, lower limit value 355 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 385 x 0.1 mm Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Oil separation, DIN 51817 N, after 7 d/40 °C <= 7 % by weight Flow pressure of lubricating greases, DIN 51805-2, test temperature: -30 °C <= 1 400 mbar Drop point, DIN ISO 2176, IP 396 >= 150 °C Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 36 months  Hazard Information (CLP)Signal word: WarningHazard Statements (H-Statements)H317 May cause an allergic skin reaction.Precautionary Statements (P-Statements)Prevention:P272 Contaminated work clothing should not be allowed out of the workplace.P280 Wear protective gloves.Response:P302 + P352 IF ON SKIN: Wash with plenty of water and soap.P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.P362 + P364 Take off contaminated clothing and wash it before reuse.Labeling ComponentsNaphthenic acids, bismuth salts Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com