Klüber HOTEMP 2000 High-temperature lubricating oil spray 400ml

HOTEMP 2000 SprayHOTEMP 2000 Spray is an advanced, synthetic hightemperature lubricant in aerosol form for friction points that are normally lubricated manually.Following evaporation of the solvent, HOTEMP 2000 Spray forms an even, thin and highly adhesive lubricant film.Content: Aerosol can 400 mlBenefits for your application:High thermal stabilityGood adhesion to friction points, long-term lubricating effectGood creeping and penetration, hence lower consumptionResistant to centrifuging, therefore reduced risk of contaminationInsoluble in water, good wash-off resistanceApplication:HOTEMP 2000 Spray is used for lubrication points subject to high thermal loads as are common in chains, slideways, gears, wire ropes, guideways or cams.HOTEMP 2000 Spray is also an ideal lubricant for motorcycle chains (also O-ring chains). It is not washed off and penetrates well into chain joints and friction points.HOTEMP 2000 Spray forms a durable, load-carrying lubricant film even at high temperatures. For the ideal service temperature, please refer to the product data.Application notes:Ensure sufficient ventilation when processing HOTEMP 2000 Spray as explosive mixtures may form.Do not spray against naked flame or onto hot or incandescent objects. Observe additional instructions for use in material safety data sheet and on can label.When applied, HOTEMP 2000 Spray forms a highly adhesive lubricant film that resists centrifuging and water wash-off. It is economical in use thanks to its adjustable nozzle. The spray jet can be changed from vertical to horizontal to ensure application of the right quantity at the desired lubrication point.Sprays should not be exposed to direct sunlight and temperatures above 50 °C.Product data: Chemical composition, type of oil synthetic hydrocarbon oil Chemical composition, type of oil ester oil Chemical composition, solvent hydrocarbon Lower service temperature 0 °C / 32 °F Upper service temperature 250 °C / 482 °F Appearance clear Color space green Density, DIN 51757, 20 °C approx. 0.94 g/cm³ Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 2 000 mm²/s Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 126 mm²/s Flash point, DIN EN ISO 2592, Cleveland, open-cup apparatus >= 230 °C Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 36 months Hazard Statements (CLP)Signal word: DangerHazard Statements (H-phrases) H222: Extremely flammable aerosol. H229: Pressurized container: may burst if heated. H412: Harmful to aquatic life with long-lasting effects.Precautionary Statements (P-phrases)Prevention: P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. P211: Do not spray on an open flame or other ignition source. P251: Do not pierce or burn, even after use. P273: Avoid release to the environment.Storage: P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.Additional Labelling (EUH-phrases) EUH208: Contains molybdenum trioxide, reaction products with Bis [O,O-bis(2-ethylhexyl)] hydrogen dithiophosphate. May cause allergic reactions.×Hazardous materials. The forwarding charges may be raised, if shipping to: DE, AT, NL, GB, CH, CZ, IT, ES, FI, NO, BE, IE, RO, PL, FR, PT, LU, DK, LI, GR, SE, SK, BG, SI, CA, LT, EE, LV, HR, SA,  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com