Klüber ISOFLEX TOPAS L 152 Rolling bearing grease 1kg can

ISOFLEX TOPAS L 152 Rolling bearing grease for a wide operating temperature rangeBase oil: Synthetic base oilOperating temperature range: -50 ° C to + 150 ° CContent: 1kg canAlso available as: , Advantages for your applicationWide operating temperature range and excellent low temperature stability thanks to the special synthetic base oilRecommended for rolling bearings due to their adequate oil separation behavior, especially under sliding friction conditionsApplicationUsed for roller bearings, e.g. in electric motors, in which quiet running is required and a wide temperature range is to be covered, e.g. in traction motorsUsed for main bearings in wind turbines and plastic / plastic or plastic / steel friction pointsAxlebox bearings with line contact, e.g. RailwaysApplications that require low starting torques at low temperaturesTechnical SpecificationsColor beigeTexture homogeneous,short-fibredDensity at 20°C, [g/cm3], approx. 0,88Service temperature range*, [°C], approx. -50 to 150Drop point, DIN ISO 2176, [°C] > 185Worked penetration, DIN ISO 2137 (ASTM D 217), 25°C, [0.1 mm] 265 – 295Corrosion protection (Emcor test) DIN 51 802, 1 week, distilled water, corrosion rating ≤ 1Base oil viscosity, DIN 51 562, pt. 01at 40°C, [mm2/s], approx.at 100°C, [mm2/s], approx.10014.5Speed factor** (n x dm), [mm x min-1], approx. 600,000Apparent dynamic viscosity, 25°C, shear rate 300 s-1, device: rotational viscometer, [mPas] 4,000 – 8,000Copper corrosion, DIN 51 811, (lubricating grease), 24 h/100°C, corrosion rating 1-100Oil separation, FTMS 791 C 321.3 (ASTM D 6184), after 30h/100°C, [% by weight] ≤ 4Oxidation stability of lubricating greases, DIN 51808, 100h/99°C, pressure drop, [bar] ≤ 0.3Water resistance, DIN 51 807 pt. 01, 3h/90°C, rating 1-90 Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com