Klüber NONTROP RB 3 DIN E Grease for gas fittings 1kg can

NONTROP RB 3 DIN E Grease for propane, butane, natural and town gas valves and fittings | N° 001045NONTROP RB 3 DIN E is a thermally stable lubricating, sliding and sealing agent based on mineral oil and thickened with a thermally very stable silicate and solid lubricant.Temperature range: -10°C to +140°C Volume: Can 1 kgAlso available in: Bucket 25 kgBenefits for your applicationTested and approved by DVGW acc. to DIN EN 377 class DVery good and durable wetting of friction pointsNeutral towards copper and its alloysHigh thermal stabilityNeutral towards DIN EN 377 elastomers, e.g. SRE-NBR 1Contains solid lubricant to compensate for roughness peaks and areas subject to elevated loadApplicationsNONTROP RB 3 DIN E is used as lubricant, sliding and sealing agent in gas equipment of all categories including the additional fittings contained in them or intended to be fitted in them which can come into contact with fuel gases.Such fittings include ball, taper plug and other valves in cooking and heating installations, etc., with an operating temperature from 0 °C to 140 °CApplication notesCarefully clean and degrease the friction points prior to initial lubrication. Then apply a thin and uniform layer of NONTROP RB 3 DIN E by means of brush, spatula or suitable metering system to all friction points of the component.Technical specifications Chemical composition, solid lubricant solid lubricant Chemical composition, solid lubricant silicate Chemical composition, type of oil mineral oil Colour space black Texture homogeneous Density at 20 °C approx. 1.10 g/cm³ Drop point, DIN ISO 2176, IP 396 >= 240 °C Copper corrosion, DIN 51811, (lubricating grease), 24h/140°C <= 2 - 140 corrosion degree Oil separation, ASTM D 6184 [FTMS 791 C 321], after 30 h/100 °C <= 1 % by weight Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 11 500 mPas Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 7 500 mPas Lower service temperature -10 °C / 14 °F Upper service temperature 140 °C / 284 °F Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com