Klüber PARALIQ GA 343 Multi-purpose grease for food industry 1kg can

PARALIQ GA 343 Multi-purpose grease for food-processing and pharmaceutical industries | N° 096017PARALIQ GA 343 is a lubricating grease based on paraffinic mineral oil and an aluminium complex soap.PARALIQ GA 343 is resistant to cold and hot water.PARALIQ GA 343 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries.The use of PARALIQ GA 343 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.Temperature range: -20°C to +110°C Volume: 1 kg can Also available in: 25 kg bucketBenefits for your applicationMulti-purpose grease for various lubrication pointsLess lubricant lost due to good water resistanceBetter component protection due to good anticorrosive behaviour, good adhesion due to high consistencyNSF H1-registered for higher process reliability and compliant with halal and kosher requirementsISO 21469 certified – supports the compliance with the hygienic requirements in your production. ApplicationsPARALIQ GA 343 is used for many different types of machines and installations in the food-processing and pharmaceutical industries where incidental contact with the food product cannot be excluded.Applications include the lubrication of rolling and plain bearings, lifting cylinders, joints, guide bars, guide rails, cam discs, seals etc.Application notesBefore applying PARALIQ GA 343, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions exist, mandatory for food-safe H1 lubrication.If the production process does not allow cleaning, we recommend the existing grease be replaced by purging the system during re-lubrication.Technical specifications NLGI grade, DIN 51818 2 Chemical composition, type of oil paraffinic mineral oil Chemical composition, thickener aluminium complex soap Lower service temperature -20 °C / -4 °F Upper service temperature 110 °C / 230 °F Colour space yellow Texture homogeneous Density at 20 °C approx. 0.90 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 4 000 mPas Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 8 000 mPas Drop point, DIN ISO 2176, IP 396 >= 220 °C Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com