Klüber Paraliq GB 363 Synthetic grease for valves 25kg bucket

Synthetic grease for valves and fittings in the food-processing and pharmaceutical industriesPARALIQ GB 363 offers excellent adhesion and is neutral to beer froth. It is also highly resistant to water and steam.PARALIQ GB 363 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of PARALIQ GB 363 can contribute to increase reliability of your production processes. Wenevertheless recommend conducting an additional risk analysis, e.g. HACCP.Size: 25kg bucketAvailable in 40g tube, 370g cartridge, 1kg can, 25kg bucketBenefitsReliable operation of beverage taps due to neutrality towards taste and beer frothExtended maintenance intervals due to very good resistance to hot and cold water and steamNSF H1-registered for higher process reliabilityISO 21469 certified – supports the compliance with the hygienic requirements in your production. You will find further information about ISO Standard 21469 on our website www.klueber.com.ApplicationPARALIQ GB 363 can be used for beverage taps, especially beer taps of all kind, equipped with NBR seals or other elements made of NBR. It does not impair the formation of beer froth or the taste of beer.PARALIQ GB 363 is also suitable for filling installations, filters, stuffing boxes, rubber membranes or seals.Application notesPARALIQ GB 363 can be applied by brush, spatula, grease gun or cartridge.Before applying PARALIQ GB 363, all lubrication points should be thoroughly cleaned to ensure maximum hygiene conditions exist and beer froth formation is not impaired.Product dataArticle number96018NSF-H1 registration056 371Chemical composition, thickenersilicateChemical composition, type of oilsynthetic hydrocarbon oilChemical composition, type of oilparaffinic mineral oilLower service temperature-30 °C / -22 °FUpper service temperature140 °C / 284 °FColour spacebeigeDensity at 20 °Capprox. 0,91 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value215 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value245 x 0,1 mmShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value8 000 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value20 000 mPasKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 2 400 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 156 mm²/sWater resistance, DIN 51807 pt. 01, 3 h/90 °C, rating<= 1 - 90Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.36 months  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com