Klüber PARALIQ GTE 703 Synthetic grease for valves and fittings 60g

PARALIQ GTE 703 Synthetic lubricating grease for valves & amp; fittings with EPDM seals | N° 022148PARALIQ GTE 703 is a special lubricating grease based on silicone oil and PTFE.The product is registered as NSF H1 and complies with FDA 21 CFR § 178.3570.It was especially developed for the incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries, thus contributing to the reliability of your production processes. Nevertheless, we recommend to conduct an additional risk analysis, e.g. HACCP.Temperature range: -50°C to +150°C Volume: 60g tubeAlso available in: 500g cartridge, 750g can, 25kg bucketBenefits for your applicationA reduction in your lubricant inventory with one lubricant which can be considered for both seals and rolling bearingsGood compatibility when coming in contact with EPDM seals or even beer foam enhancing seal life and reduction in down timeHigh resistance to many types of media such as disinfectants, cleaning agents, water, steam ensuring maximum protection of both seals and bearings, enhancing life and operating cost reductionNSF H1 registered supporting process reliabilityNSF ISO 21469 certified – supports compliance with the hygienic requirements in your production plant. You will find further information on ISO standard 21469 on our website www.klueber.comApplicationsPARALIQ GTE 703 is a special grease suitable for beer taps, barrel filling installations and valves.It can be used for the lubrication of seals in the beverage industry whenever a H1 lubricating grease compatible with EPDM and complying with FDA is required. Additionally, PARALIQ GTE 703 can be used for rolling bearings subject to low loads.Application notesPARALIQ GTE 703 can be applied by spatula, grease gun or directly from the tube.The lubrication technique for highly viscous lubricants should be chosen with great care: in the system used the intake of air should be avoided since otherwise the high pressures lead to oxidation and consequently decomposition of the product.Technical specifications Lower service temperature -50 °C / -58 °F Upper service temperature 150 °C / 302 °F Colour space white Texture homogeneous Density at 20 °C approx. 1.31 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 220 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 250 x 0.1 mm Minimum shelf life from the date of manufacture – in a dry, frost-free place and in the unopened original container, approx. 36 months Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com