Klüber STABURAGS NBU 30 Lubricating grease with high resistance 1kg

Lubricating grease with high resistance to ambient media.The industry imposes increasingly diverse and stringent requirements on lubricating greases. Many applications require greases offering good wear protection, high mechanodynamical stability and water resistance.For such requirements we developed STABURAGS NBU 30, a lubricating grease based on mineral oil and a barium complex soap.STABURAGS NBU 30 offers good wear and corrosion protection as well as resistance to water and many diluted alkaline and acidic solutions, thus extending relubrication intervals and reducing operating costs.Content: 1kg canAvailable in  400g cartridge, 1kg can, 25kg bucketYour benefits at a glance:Long component life due to good corrosion protection in humid and aggressive environmentGood resistance to water, water vapour and many diluted alkaline and acidic solutionsGood sealing characteristics with water, hot water, water vapour and aggressive mediaHigh wear protection in a wide range of mechano-dynamical loads and at high surface pressuresNSF H2 registeredApplication:STABURAGS NBU 30 has been especially designed for use as sealing grease, for valves and fittings as well as for the lubrication of low-speed rolling and plain bearings subject to humidity, water vapour and aggressive media. Typical applications include bearings in conveyors (load rollers in wet areas), in textile machines for wet processing (festoon steamers, washing machines), and bearings of machines in the food-processing industry.STABURAGS NBU 30 is NSF H2 registered.Application notes:STABURAGS NBU 30 can be applied by spatula, brush or lever grease guns.Friction points can be cleaned using commercial cleaning agents.We recommend having the pumpability of STABURAGS NBU 30 in automatic lubrication systems checked by the manufacturer of the installation.In general, plastics and elastomers which are resistant to mineral oil or mineral oil-based greases are compatible with STABURAGS NBU 30. Owing to the many different compositions of elastomers and plastics, we recommend checking their compatibility prior to series application.Product data: Article number 017053 2 registration 135 679 Chemical composition, type of oil mineral oil Chemical composition, thickener barium complex soap Lower service temperature -10 °C / 14 °F Upper service temperature 150 °C / 302 °F Color space beige Texture fibrous Texture homogeneous Density at 20 °C approx. 0.99 g/cm³ Worked penetration, DIN ISO 2137, 25 °C, lower limit value 245 x 0.1 mm Worked penetration, DIN ISO 2137, 25 °C, upper limit value 275 x 0.1 mm Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 490 mm²/s Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 31 mm²/s Shear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value 10 000 mPas Shear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value 20 000 mPas Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water <= 1 corrosion degree Drop point, DIN ISO 2176, IP 396 >= 220 °C Flow pressure of lubricating greases, DIN 51805, test temperature: -10 °C <= 1 400 mbar Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 60 months  Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com