Klüber STABURAGS NBU 4 Lubricating grease 1kg tin

Klüber STABURAGS NBU 4 Lubricating grease with excellent wear resistance | n° 017050STABURAGS NBU 4, 12 are lubricating greases based on mineral oil and barium complex soap. These products are resistant to very high specific surface pressure, thus ensuring good wear protection. In addition, they are resistant to corrosion, water and many diluted alkaline and acid solutionsSize: 1kg canAvailable in , 1kg can, Benefits for your application:Good corrosion protectionGood resistance to ambient mediaExcellent wear protectionGood resistance to tribo-corrosionGood load-carrying capacityGood sealing effectApplication:STABURAGS NBU 4 has been used successfully on highspeed rolling bearings exposed to humidity or ambient media. It is suitable for rolls, spindles, cam rollers, tensioning rollers andv motors.STABURAGS NBU 12 is efficient on medium-speed rolling bearings subject to humidity or ambient media.It is used on water pumps, wheel bearings and motors; and in the textile industry, on all wet processing equipment such as washing, mercerising and dyeing machines.Application notes:These greases are applied by brush, spatula or conventional metering systems.Product data:Article number17050Chemical composition, type of oilmineral oilChemical composition, thickenerbarium complex soapLower service temperature-20 °C / -4 °FUpper service temperature90 °C / 194 °FService temperature, upper limiting value for continuous lubrication130 °CColour spacebeigeDensity at 20 °Capprox. 0,96 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value245 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value275 x 0,1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 46 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 7 mm²/sShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value6 000 mPasShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value10 000 mPasDrop point, DIN ISO 2176, IP 396>= 220 °CFour-ball tester, welding load, DIN 51350 pt. 04>= 3 000 NSpeed factor (n x dm)500 000 mm/minWater resistance, DIN 51807 pt. 01, 3 h/90 °C, rating<= 1 - 90Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.60 moisSTABURAGS NBU4Hazard Information (CLP)Signal word: Warning.Hazard Statements (H-phrases)H302 + H332 Harmful if swallowed or inhaled.Precautionary Statements (P-phrases)Prevention:P264 Wash skin thoroughly after handling.P270 Do not eat, drink or smoke when using this product.P271 Use only outdoors or in a well-ventilated area.Response:P301 + P312 + P330 IF SWALLOWED: If feeling unwell, call a POISON CENTER/doctor. Rinse mouth.P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. If feeling unwell, call a POISON CENTER/doctor.Hazard-determining Component(s) for LabelingBarium saltsAdditional Labeling (EUH-phrases)EUH208 Contains Pin-2(3)-ene. May cause an allergic reaction. Information on product safety (Manufacturer, Contact)KLÜBER LUBRICATION MÜNCHEN GMBH & CO. KG, Geisenhausenerstraße 7, 81379 München, GERMANY, +49 89 7876 0, , www.klueber.com